2003-04 Mach 1 Registry Owners Club

2003-04 Mach 1 Registry Owners Club (http://www.mach1registry.org/forums/index.php)
-   Engine & Drivetrain (Including trans & rear axles) (http://www.mach1registry.org/forums/forumdisplay.php?f=64)
-   -   Help with my 04 Aviator (http://www.mach1registry.org/forums/showthread.php?t=116648)

3150Mach1 09-25-2011 08:10 PM

Help with my 04 Aviator
 
There is a whine in the area of the power steering pump It ramps up and down with RPMs. Thought at first it was the alternator. But its coming from the area of the PS pump. I used my scope and it picks up the whine on the pump. Read on an SUV forum that it could be the idler pully Is that possible???? Thoughts???? Is a whine that ramps with RPMs a normal sound when a PS pump is starting to fail?

bleedingfordblu 09-26-2011 03:28 PM

Re: Help with my 04 Aviator
 
That sounds about right. If the noise is coming from the ps pulley then its gotta go. Pretty commmen ford thing I think

STREET BULLY 09-26-2011 04:18 PM

Re: Help with my 04 Aviator
 
Quote:

Originally Posted by 03Mach150BP (Post 1426415)
There is a whine in the area of the power steering pump It ramps up and down with RPMs. Thought at first it was the alternator. But its coming from the area of the PS pump. I used my scope and it picks up the whine on the pump. Read on an SUV forum that it could be the idler pully Is that possible???? Thoughts???? Is a whine that ramps with RPMs a normal sound when a PS pump is starting to fail?

Check the fluid. they all make that type of racket when low on fluid or going bad.

3150Mach1 09-26-2011 05:16 PM

Re: Help with my 04 Aviator
 
Quote:

Originally Posted by STREET BULLY (Post 1426604)
Check the fluid. they all make that type of racket when low on fluid or going bad.

Fluid level was good. I sucked all the fluid out of the and replaced it with Lucas PS fluid/conditioner. I think its actually working. The noise is getting less and less. Probably just a bandaid. I checked at Advance Auto today and a rebuilt pump is about $60. Never changed one out. Is it a tough job?


All times are GMT -4. The time now is 11:58 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com