Fuel pressure sensor
Hi guys,
do 04 Mach 1's have a fuel pressure sensor already on the car like the Cobras did? Thinking about getting an aeroforce interceptor gauge and was not sure if I would the sensor kit too? Thanks. |
Re: Fuel pressure sensor
yes the Machs have a factory fuel rail pressure sensor
|
Re: Fuel pressure sensor
oh really!?
so should get the reading from the interceptor OBD connection? |
Re: Fuel pressure sensor
yes it should.
|
Re: Fuel pressure sensor
There is another thread you posted in about there being a difference between the reading on the interceptor and an analogue gauge I saw?
|
Re: Fuel pressure sensor
hard to say without seeing the thread. I know there are a lot of PIDs for fuel pressure, some of them are pressure drop, some of them are deltas etc... could be as simple as comparing the wrong PIDs
|
Re: Fuel pressure sensor
It was this one,
http://www.mach1registry.org/forums/...d.php?t=132095 Where the reading on is 30psi on the mechanical gauge and 40psi on the electrical sensor but both are correct? |
Re: Fuel pressure sensor
The reading I am getting seems to be between 39 and 41 any time, ie engine off, engine idle and engine under acceleration.
Really not too sure what I should expect to see with fuel pressure readings, just thought it differ between those 3 states alot more than what it does. Any ideas? |
Re: Fuel pressure sensor
would help to know exactly what PID you're reading as there are several fuel pressure related ones and they read different ways for different reasons.
|
Re: Fuel pressure sensor
Oh OK.
From memory it was just the first fuel pressure one that was in the list. How can I identify it? |
Re: Fuel pressure sensor
Go back into setup and tell us what they're calling it
|
All times are GMT -4. The time now is 04:32 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com