2003-04 Mach 1 Registry Owners Club

2003-04 Mach 1 Registry Owners Club (http://www.mach1registry.org/forums/index.php)

- Power Adders (http://www.mach1registry.org/forums/forumdisplay.php?f=76)

- - Eaton Swap..... (http://www.mach1registry.org/forums/showthread.php?t=71833)

Re: Eaton Swap.....

another ideal so someone doesn't jump on you is start your own thread and that way no one can say anything too you

Re: Eaton Swap.....

thank you!! Sorry for the crap pics, its cell phone. You cant see it, but I do have the injectors, and there in another tensioner sitting behind the air filter.

http://www.supermotors.net/getfile/7...4-08.46.28.jpg
http://www.supermotors.net/getfile/7...4-08.46.43.jpg
http://www.supermotors.net/getfile/7...4-08.46.55.jpg
http://www.supermotors.net/getfile/7...4-08.47.15.jpg

Re: Eaton Swap.....

well hope the guys that know part for part can help you out. i would thank that every part would have a part number on it. but like i said you could start your own thread and no one could say anthing to you. when you have time should take everything out and put just a few parts in the picture that way everything looks real clear and prob get some better help on this

Re: Eaton Swap.....

Yeah Ill do that and start a thread. thanks

Re: Eaton Swap.....

i just think it would get more attention that way. also like i said take more pictures but spread em out that way everyone looking at them can get a better look a each part. not tryin to be mean but they were bunch togather and with the eaton swap kit there is so many parts to go with it. good luck though. you could also pm some of the guys on here that are real experiance and ask them to check out your thread, 3 off the top of my mind lookngo, reloaded, and machgsxr. they seem to know the kit from front to back

Re: Eaton Swap.....

i got some guy selling an Eaton from a Harley Davidson F150... do any of your Eaton Swap Guru's know if it will fit on our Mach's? dont know if it looks complete either, but he's asking $2k OBO

He said it includes all bolts,brakets,vac lines ,hoeses, belt,waterpump,belt,drive pullys,crank pully,injectors,intake manifold,lifters,push rods,camshafts,throtle body all bolts needed incl. It was on the truck for a short time not even 2,000 on truck when taken off becouse of an after maket supercharger and has been storaged since 2003 thats the same year of the truck,It will fit any 4.6L or 5.4L V8 from1997 to 2004 ford engines 281cu.block and 331cu.block

here are pics..

Re: Eaton Swap.....

well if your mach has a 2 valve in it ,that is the setup for you:smack:

Re: Eaton Swap.....

Quote:

Originally Posted by nickster (Post 1250404)

well if your mach has a 2 valve in it ,that is the setup for you:smack:

:23:

Re: Eaton Swap.....

Quote:

Originally Posted by nickster (Post 1250404)

well if your mach has a 2 valve in it ,that is the setup for you:smack:

uhh, duh, it does. doesnt yours?! :crazy: anyway thanks, smartass :3amin: lol

The Termi uses the same Romeo Iron Block as the block as the GT's. if those are the same, I thought Eaton with the 2v heads would be interchangeable too.

Re: Eaton Swap.....

Quote:

Originally Posted by vtecDIS (Post 1250473)

you talkin about the ford gt or gt mustang? anyways the 5.4 is wider then the 4.6. so no it would be the same. different intakes. pretty sure the blower would be out the hood.

Re: Eaton Swap.....

So using the cobra gasket on the oil cooler adapter will result in a leak? Just making sure since the post where it mentions it is 3 years old.

Re: Eaton Swap.....

Hey could someone tell me the belt numbers for the belts so i can get them ordered. Im looking for gates # if possible, i went through the thread and did not find them posted.

Re: Eaton Swap.....

Just trying to get a rough estimate on how much money i'll get back from my stock parts after I do the eaton swap and was wondering how much you guys got back?

Re: Eaton Swap.....

Any ideas on belt numbers...thx

Re: Eaton Swap.....

if you go to billetflow they have some sort of belt sizing on there, or the company you are using for your pulleys could help you out

Re: Eaton Swap.....

Yea it only list the one belt thats my problem ha.

Re: Eaton Swap.....

should have a bunch of different ones for different pulleys

are you using the stock eaton pulley set up or what pulley brand and size did you go with

Re: Eaton Swap.....

Quote:

Originally Posted by Mudd92 (Post 1257456)

Yea it only list the one belt thats my problem ha.

Just go to autozone and buy a gatorback belt for a 2003 cobra. They should have it in stock there.

Re: Eaton Swap.....

but wonded it make a different if he was getting a different pulley than stock.

i would say if you were using stock pulley then take the advice from above and just go to autozone or some parts store and pick up a stock cobra belt and you will be good.

Re: Eaton Swap.....

here is the link
http://www.billetflow.com/supercharger_pulleys.htm

Belt Selection Guide
Note: We only carry a few belt sizes

(a good place to order belt online is www.rockauto.com )
Use the following 5% discount code at RockAuto: 647174351781

No Idlers

Pulley Size.....Belt Size.......Gates Part No......Gatorback Part No.
3.65 (stock).....75.1" .............K080751................4080750
3.40................75".................K080750... .............4080750
3.10................74.5...............K080745.... ............4080745

With Single Snub Idler and Bracket Kit

Pulley Size.....Belt Size.......Gates Part No......Gatorback Part No.
3.65...............75.5"...............K080755.... ............4080755 (can not use New Bracket)
3.40...............75.1"...............K080751.... ............4080750 (can not use New Bracket)
3.10...............74.5"...............K080745.... ............4080745 (must use 92mm Idler Pulley)
2.93...............74.5"..................K080745. ...............4080745 (with 100mm Idler)
2.76...............74.5"..................K080745. ...............4080745 (with 100mm Idler)

With 4 Pulley snub Idler Kit (3-100mm and 1-92mm)

Pulley Size....Belt Size........Gates Part No......Gatorback Part No.
3.65..............77"...................K080772... ............4080772 (can not use New Bracket)
3.40..............76.5"................K080765.... ...........4080765 (can not use New Bracket)
3.10..............75.5"................K080755.... ...........4080755 (must use 92mm Idler Pulley)
2.93..............75.5"................K080755.... ...........4080755 (with 100mm Idler)
2.76..............75.1".................K080751... ............4080750 (with 100mm Idler) (Stock Belt)

With 4 Pulley snub Idler Kit (3-100mm and 1-92mm) and 2lb Metco Lower kit

Pulley Size....Belt Size........Gates Part No......Gatorback Part No.
3.65..............XX.X"................K080XXX.... ...........4080XXX (can not use New Bracket)
3.40..............XX.X"................K080XXX.... ...........4080XXX (can not use New Bracket)
3.10..............XX.X"................K080XXX.... ...........4080XXX (must use 92mm Idler Pulley)
2.93..............78.0"................K080780.... ...........4080780 (with 100mm Idler)
2.76..............XX.X"................K080XXX.... ...........4080XXX (with 100mm Idler) (Stock Belt)

With 4 Pulley snub Idler Kit (3-100mm and 1-92mm) and 4lb Metco Lower kit

Pulley Size....Belt Size........Gates Part No......Gatorback Part No.
3.65..............XX.X"................K080XXX.... ...........4080XXX (can not use New Bracket)
3.40..............XX.X"................K080XXX.... ...........4080XXX (can not use New Bracket)
3.10..............XX.X"................K080XXX.... ...........4080XXX (must use 92mm Idler Pulley)
2.93..............XX.X"................K080XXX.... ...........4080XXX (with 100mm Idler)
2.76..............XX.X"................K080XXX.... ...........4080XXX (with 100mm Idler) (Stock Belt)

With 4 Pulley snub Idler Kit (3-100mm and 1-92mm) and 6lb Metco Lower kit

Pulley Size....Belt Size........Gates Part No......Gatorback Part No.
3.65..............XX.X"................K080XXX.... ...........4080XXX (can not use New Bracket)
3.40..............XX.X"................K080XXX.... ...........4080XXX (can not use New Bracket)
3.10..............XX.X"................K080XXX.... ...........4080XXX (must use 92mm Idler Pulley)
2.93..............XX.X"................K080XXX.... ...........4080XXX (with 100mm Idler)
2.76..............XX.X"................K080XXX.... ...........4080XXX (with 100mm Idler) (Stock Belt)

With 4 Pulley snub Idler Kit (3-100mm and 1-92mm) and 8lb Metco Lower kit

Pulley Size....Belt Size........Gates Part No......Gatorback Part No.
3.65..............XX.X"................K080XXX.... ...........4080XXX (can not use New Bracket)
3.40..............XX.X"................K080XXX.... ...........4080XXX (can not use New Bracket)
3.10..............XX.X"................K080XXX.... ...........4080XXX (must use 92mm Idler Pulley)
2.93..............XX.X"................K080XXX.... ...........4080XXX (with 100mm Idler)
2.76..............XX.X"................K080XXX.... ...........4080XXX (with 100mm Idler) (Stock Belt)

Re: Eaton Swap.....

Quote:

Originally Posted by 460hpmach1 (Post 1257516)

He was asking about the second belt, which would be the inner belt since he found the chart that you just posted up with the belt lengths that are affected by the changing of the s/c pulleys and crank pulley. The inner belt is not affected by going to smaller pulleys.

THe only way to affect the inner belt length would be by deleteing the p/s or a/c.

Re: Eaton Swap.....

Quote:

Originally Posted by machgsxr (Post 1257531)

i'm sorry i thought he was talking bout the s/c belt. my bad. i was just tryin to help

Re: Eaton Swap.....

Thanks folks! Heres what I got from the parts catlog at work through Oreillys because I wanted gates.

K060960 - ACCESSORY
K80751 - SUPERCHARGER

Just if that helps anyone for the accesory belt. Since the S/C was posted above ^

Re: Eaton Swap.....

The cobra fuel rail is not required correct? I didnt see just wanted to be sure...thanks

Re: Eaton Swap.....

i believe you need the cobra fuel rail for the eaton swap, it seems to be part of the eaton swap kit