2003-04 Mach 1 Registry Owners Club

2003-04 Mach 1 Registry Owners Club (http://www.mach1registry.org/forums/index.php)
-   Electrical System (http://www.mach1registry.org/forums/forumdisplay.php?f=69)
-   -   CD 6 Player Problems - $90.00 Solution (http://www.mach1registry.org/forums/showthread.php?t=63877)

Aerowrench 04-19-2007 06:02 PM

CD 6 Player Problems - $90.00 Solution
 
After the third f*cking radio I bought on eBay - One the wrong spec., another the wrong radio entirely (used a Mach 1 interior shot for his listing) and the third with a D.O.A. CD player, I finally gave up and went searching for an OEM car audio repair shop. These guys know exactly what's need to fix your CD player.
They quoted me around $90 if I sent in my CD player only, so here's some tips on seperating the faceplate and radio/ CD player.

-Obtain a T08 and a T10 Torx bits (these are small! Radio Shack carries them in a kit)
-Pull on the volume knob, it pops right off
-Remove the faceplate (4 countersunk screws, carefully pop it over the 4 tabs), disconnect the small 2 pin plug
-If you want, this is a good time to clean your faceplate. Remove the circuit board by removing the gold screws and lift it out. I washed mine with mild detergent and a paint brush, rinse and blow dry with compressed air. It's just plastic at this point, allow to air dry completely.
-The CD player is held on with side screws, pretty self-explanatory.

This is what you need to send off...http://www.rivetech.com/Fordmech.html

Home page...http://www.rivetech.com/

Fastbandit99 04-19-2007 06:40 PM

Re: CD 6 Player Problems - $90.00 Solution
 
Quote:

Originally Posted by Aerowrench (Post 782332)
After the third f*cking radio I bought on eBay - One the wrong spec., another the wrong radio entirely (used a Mach 1 interior shot for his listing) and the third with a D.O.A. CD player, I finally gave up and went searching for an OEM car audio repair shop. These guys know exactly what's need to fix your CD player.
They quoted me around $90 if I sent in my CD player only, so here's some tips on seperating the faceplate and radio/ CD player.

-Obtain a T08 and a T10 Torx bits (these are small! Radio Shack carries them in a kit)
-Pull on the volume knob, it pops right off
-Remove the faceplate (4 countersunk screws, carefully pop it over the 4 tabs), disconnect the small 2 pin plug
-If you want, this is a good time to clean your faceplate. Remove the circuit board by removing the gold screws and lift it out. I washed mine with mild detergent and a paint brush, rinse and blow dry with compressed air. It's just plastic at this point, allow to air dry completely.
-The CD player is held on with side screws, pretty self-explanatory.

This is what you need to send off...http://www.rivetech.com/Fordmech.html

Home page...http://www.rivetech.com/


Great post, my CD payer cycles on it own with the key off. I am afraid it could catch fire.

Not trying to highjack but you mentioned the specialty bits and I just bought this set from harbor freight and I thought this would be a good thread to post in. Very cheap price for all these bits.

http://www.harborfreight.com/cpi/cta...emnumber=91310

hawk 04-19-2007 06:42 PM

Re: CD 6 Player Problems - $90.00 Solution
 
Excellent info!

Aerowrench 04-19-2007 09:14 PM

Re: CD 6 Player Problems - $90.00 Solution
 
Didn't think about Harbor Freight.

Another important point...These guys told me if our radios are shipped without a "shipping plug", all it takes is a good jolt to screw up the CD trays. Most resellers (online salvage yards) don't know this. -that big yellow caution placard isn't there for looks.

NightOfTheCow 07-06-2007 01:51 AM

Re: CD 6 Player Problems - $90.00 Solution
 
OEM CD players have had issues for a long time. I rented a 2001 mustang 5 years ago and it was locking up. My '03 GT cd player started to lock up on me occasionally at 7,000 miles. My mach CD player died in September 2005. You'd think they'd do something about this.

03mach1 04-03-2008 12:16 PM

Re: CD 6 Player Problems - $90.00 Solution
 
I know the mutli changers do NOT recommend CD's with "Paper Labels" on them, it can jam. It states in the owners manual, Only the direct print type CD's or if you make them yourself, just label them with a felt tip pen.

jpmach1 06-24-2008 08:04 PM

Re: CD 6 Player Problems - $90.00 Solution
 
i have the 6 disc changer and it is broke this is the fouth time and my cd's are stuck i found someone who could fix the cd changer but it will cost me $320.00 but the problem is i do not want this radio any more what can i do please help

DownSouthMach 06-24-2008 08:14 PM

Re: CD 6 Player Problems - $90.00 Solution
 
Buy one used on the registry or ebay. Be sure to get the right one for your year model.

Edit nevermind didn't fully read your post :smack:

I guess for cheap you can buy the harness and use an aftermarket cd player, but most will recomend ditching the whole 460 system. It sucks, but if my 6 disc craps out on me thats probly what i'll do

jpmach1 06-24-2008 08:37 PM

Re: CD 6 Player Problems - $90.00 Solution
 
have you had any problems with yours

DownSouthMach 06-24-2008 11:05 PM

Re: CD 6 Player Problems - $90.00 Solution
 
in my 02 gt it had problems ejecting cd's but it was easy to get them out.

In the mach, no problems at all.

dlandry427 07-09-2011 05:42 PM

Re: CD 6 Player Problems - $90.00 Solution
 
0 dollar solution! I figured if a yanked it out and broke something, it was about time for a new one anyway. The unit is held in by to 7mm bolts, I think I saw 8mm posted earlier.

Three plugs, the clips are on the bottom. Then pull the antenna plug.

The whole thing comes apart with a T-10 bit and a phillips head screw driver. I just kept unscrewing things until I could separate the cd changer from the rest of the radio. The racks slide up and down on little plastic posts. If you gently move the clips back you can slide the trays up and down. Pulled out the jammed cd and put it all back together

And what do you know......It actually works again

8 Years into the Mach, and The Registry is still a priceless sorce of information. Thanks to the wisdom of all those that came before me!

Danny 07-10-2011 05:50 AM

Re: CD 6 Player Problems - $90.00 Solution
 
Quote:

Originally Posted by dlandry427 (Post 1404257)
0 dollar solution! I figured if a yanked it out and broke something, it was about time for a new one anyway. The unit is held in by to 7mm bolts, I think I saw 8mm posted earlier.

Three plugs, the clips are on the bottom. Then pull the antenna plug.

The whole thing comes apart with a T-10 bit and a phillips head screw driver. I just kept unscrewing things until I could separate the cd changer from the rest of the radio. The racks slide up and down on little plastic posts. If you gently move the clips back you can slide the trays up and down. Pulled out the jammed cd and put it all back together

And what do you know......It actually works again

8 Years into the Mach, and The Registry is still a priceless sorce of information. Thanks to the wisdom of all those that came before me!

Im always for saving money :teeth: gonna try this next weekend. Im not sure if I have a disc stuck in there or what but when I push on cd it tells me "ERROR" hopefully this fixes it because the punch to the stereo sure didnt do anything besides crack the lens :23:. Thanks

donjuaniii 08-18-2011 10:40 AM

Re: CD 6 Player Problems - $90.00 Solution
 
Really good info -


Haven't had any prohblem with mine yet but it's always better to be knowledgeable & prepared...

gamatt 08-18-2011 11:48 AM

Re: CD 6 Player Problems - $90.00 Solution
 
I fixed my CD player by getting an iPod adapter and hooking it up to the sat input. No more jammed cd's! ;)

X-1Mach1 09-15-2011 11:36 AM

Re: CD 6 Player Problems - $90.00 Solution
 
Quote:

Originally Posted by gamatt (Post 1414613)
I fixed my CD player by getting an iPod adapter and hooking it up to the sat input. No more jammed cd's! ;)

Where is the sat input? On the back of the cd changer?

MACHERONER 01-04-2012 07:13 PM

Re: CD 6 Player Problems - $90.00 Solution
 
[/QUOTE]8 Years into the Mach, and The Registry is still a priceless sorce of information. Thanks to the wisdom of all those that came before me![/QUOTE]

Couldnt have said it better.

ModularMach1 01-04-2012 09:39 PM

Re: CD 6 Player Problems - $90.00 Solution
 
Quote:

Originally Posted by x-1mach1 (Post 1423312)
where is the sat input? On the back of the cd changer?

x2!

jcooper0818 01-05-2012 06:51 AM

Re: CD 6 Player Problems - $90.00 Solution
 
Quote:

Originally Posted by ModularMach1 (Post 1449942)
x2!


04's have the sat only i do believe. I have an 03 but also have the ipod hookup. Just had to unplug the cd changer and plug the ipod connector that comes with the kit in its place and i've had an ipod hookup (iphone 4s in my case) hookup for over a year now :COOL:

i'll find a link and take a pic of my little setup for you to be jealous :D

gamatt 01-05-2012 07:23 AM

Re: CD 6 Player Problems - $90.00 Solution
 
It's on the back of the radio in my '04. I'm putting my car back to stock to sell, so I'll be selling my PIE aux adapter soon. I just got an '03 Cobra so I'm going to have to order a slightly different one for it.

JimsZ 01-05-2012 08:16 AM

Wow... people wanting to fix stock stereo? Think if mine ever quits I will go aftermarket anyway! Anyone interested in an 03 before it breaks? Lol

Sent from INDIANA - Home of 236,745,944 highway construction barrels...

ModularMach1 01-05-2012 09:29 AM

Re: CD 6 Player Problems - $90.00 Solution
 
Quote:

Originally Posted by JimsZ (Post 1450012)
Wow... people wanting to fix stock stereo? Think if mine ever quits I will go aftermarket anyway! Anyone interested in an 03 before it breaks? Lol

Sent from INDIANA - Home of 236,745,944 highway construction barrels...

I like the stock look. If i had an ipod jack I'd NEVER listen to cds. Or attempt to listen to them as it is most of the time lol

mach1z 01-16-2012 12:32 AM

Re: CD 6 Player Problems - $90.00 Solution
 
pie makes a kit for 2003 radios. I just installed mine as part of my new years resolution :). I have limited control of the ipod through the stock head unit. I can't believe I let that stuff sit in my closet for almost a year.

MPG LOL 01-16-2012 01:35 PM

Re: CD 6 Player Problems - $90.00 Solution
 
what do you need to plug in your ipod in to the satellite radio part?

BadAndy 06-12-2012 03:58 PM

Re: CD 6 Player Problems - $90.00 Solution
 
Quote:

Originally Posted by MPG LOL (Post 1452438)
what do you need to plug in your ipod in to the satellite radio part?

This plugs in between the harness and radio.

http://www.amazon.com/FRDN-AUX-PIE-A..._172282_a1_4_p

This kit includes an RCA-to-3.5 audio adapter (plugs into PIE adapters RCA port) along with an extended auxiliary port that you can mount on a panel (I mounted mine at the bottom of the stereo surrounding panel) and cable to plug into your iPod/Pad/Phone/MP3 device or sat radio.

http://www.amazon.com/PAC-IS335-3-5-...pd_sim_sbs_e_1

Mach Dawg 08-19-2018 02:17 PM

Re: CD 6 Player Problems - $90.00 Solution
 
Well boo this company is no longer in business. I know I'm the odd ball but I want to fix mine or repair it. I can't seem to find an aftermarket one that will load 6 CD's? Anyone know of a repair shop?

Mach351 08-23-2018 11:21 AM

Re: CD 6 Player Problems - $90.00 Solution
 
Quote:

Originally Posted by Mach Dawg (Post 1632301)
Well boo this company is no longer in business. I know I'm the odd ball but I want to fix mine or repair it. I can't seem to find an aftermarket one that will load 6 CD's? Anyone know of a repair shop?

I can identify with trying to get it fixed... I've contemplated getting an old cassette unit restored but the price quote was a little high for me (almost $200). the whole ROI thing is ingrained too deeply

This is unrelated, but - my wife's new CX-5 does not have a CD player.
The sales person basically said with all of the streaming services and electronic media devices (e.g. Ipods / cell phones) there is no demand for one.
It has Spotify, Pandora, XM apps in the integrated music system, it's Bluetooth ready, and has two USB ports in the front and two in the back seat.
_

USMCWeatherMan 08-25-2018 06:43 AM

Re: CD 6 Player Problems - $90.00 Solution
 
Quote:

Originally Posted by Mach351 (Post 1632367)
I can identify with trying to get it fixed... I've contemplated getting an old cassette unit restored but the price quote was a little high for me (almost $200). the whole ROI thing is ingrained too deeply

This is unrelated, but - my wife's new CX-5 does not have a CD player.
The sales person basically said with all of the streaming services and electronic media devices (e.g. Ipods / cell phones) there is no demand for one.
It has Spotify, Pandora, XM apps in the integrated music system, it's Bluetooth ready, and has two USB ports in the front and two in the back seat.
_

I had the version of the Mach head unit that allowed me to plug in an adapter, which allows me to plug my phone in via a 3.5mm headset jack so I can listen to music streamed or saved on my phone.

This is the one that worked for mine: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Mach Dawg 09-02-2018 06:39 AM

Re: CD 6 Player Problems - $90.00 Solution
 
Also I'm not sure if my rear amp(s) are going bad? When I turn on radio it plays shortly & then loud/slight "popping" from rear speakers, but if use the balance to all front no change?? The music continues to try & play out of them.
I would think this would eliminate rear amp? But maybe cause it's still getting power? I suck at this stuff so don't beat me up to bad :OUCH:
Anyway replacement radios can be found on Ebay as well as amps so I just need to know which way to go. Thanks everyone! :gears:

Mach Dawg 10-17-2018 02:56 PM

Re: CD 6 Player Problems - fix!
 
I found this company on Ebay & they got mine for going for $175. Super quick turnaround too:
https://www.ebay.com/itm/REPAIR-98-0...-/123220683798
This repair appears to have fixed my amp feedback too!:hail1:
https://cd4car.com/content/forms/repairform.html

HAEG 10-18-2018 07:33 AM

Re: CD 6 Player Problems - fix!
 
Going to have to look into the repair process. Would rather have the factory unit just because... Aftermarket never seems to just flow with the interior and I notice its darker in the seating area as the factory radio gave off a little ambient lite or I'm just too freaking old...

falcongtho3 10-18-2018 09:15 PM

Re: CD 6 Player Problems - $90.00 Solution
 
I haven't looked to deeply into it, but there appear to be some DIY videos on how to fix the common issue with the CD changers on You Tube. I'm going to look into it when time allows as mine has joined the CD ERROR brigade.

:borg:

alex04mach1 08-20-2020 11:54 PM

Re: CD 6 Player Problems - $90.00 Solution
 
What was the part number on your 6 cd changer unit? Thanks

falcongtho3 08-21-2020 07:23 AM

Re: CD 6 Player Problems - fix!
 
Quote:

Originally Posted by HAEG (Post 1632833)
Going to have to look into the repair process. Would rather have the factory unit just because... Aftermarket never seems to just flow with the interior and I notice its darker in the seating area as the factory radio gave off a little ambient lite or I'm just too freaking old...

I did do the self repair on my disc changer and it's worked for over a year now. A little patience and super glue on the jack screw (that does fall out when you open up the unit) seems to have fixed the problem.

:borg:


All times are GMT -4. The time now is 06:03 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com