Sticky Suspension Thread
1 Attachment(s)
Maybe there is a suspesnion Sticky, but if there not go ahead and start one, i think it be a good ideal to have one
Also post a picture of your stance H&R super sports springs w/ MM Iso MM C/C plates Steeda X2 Balljoints Steeda Bumpsteer Kit Steeda FLSFC Steeda G-Trac Bar UPR Non-Adj Lower/Upper rear control arms Lakewood non-adj drag shocks/strut Suspension Parts have, but still haven't installed Steeda Rear shock bar Steeda Anti-Roll Bar UPR rear axle braces ASh |
Re: Sticky Suspension Thread
I agree with you. It is an excellent idea that you have.
|
Re: Sticky Suspension Thread
That's my old setup
Eibach prokit Stock shock and struts Stock C/C plates 1inch spacers in the front 2 inch spacers in the rear http://imageshack.us/photo/my-images/852/img1461j.jpg/ |
Re: Sticky Suspension Thread
-H&R Super Sport Springs
-NO Iso's front or rear -Stock CC plates -Tires-245/45R17 Front, 275/40R17 Rear http://farm8.staticflickr.com/7181/6...e6cef3f5_b.jpg http://farm8.staticflickr.com/7199/6...b1696846_b.jpg |
Re: Sticky Suspension Thread
Maximum Motorsports complete coilover front suspension
Steeda rear springs Steeda read LCAs http://tampaftp.com/jeff/2003%20Mach...1/IMG_2065.JPG |
2 Attachment(s)
Steeda Aluminum Uppers
Aluminum lowers 4 Bolt C/C Plates Sport Springs G-Trac Bar FLSFC Front Sway Bar Rear Sway Bar Stock Tokico's Rear Iso's removed Attachment 57310 Attachment 57311 Jeff, how do you like the MM coilovers? Any noise and what shocks are you using? |
Re: Sticky Suspension Thread
Quote:
My 93 coupe build is getting the max grip package with MM Sport dampers (like bilstein HDs on steroids) :) I'm a maximum motorsports dealers, so let me know if you need anything ;) Lot's more pics of the car in action here: http://tampaftp.com/jeff/sebring |
Re: Sticky Suspension Thread
http://img.photobucket.com/albums/v4...814_194458.jpg
H&R Race springs (no isos) full interior, spare tire and trunk lining removed MM panhard bar MM torque arm MM HD LCAs MM camber caster plates MM FLSFCs Bilstein HDs Steeda front bar Stifflers jacking rails |
Re: Sticky Suspension Thread
2 Attachment(s)
H&R SS Springs
Original Iso's Tokiko D Spec Shocks/Struts MM XD Non Adj. LCA's |
Re: Sticky Suspension Thread
Quote:
|
Re: Sticky Suspension Thread
So for those of us that are new to building a car....
I want to start building my Mach1 with the end result in mind, not do a little, and want more later. Just want to build it for around 650RWHP and start from the beginning. That being said what kind of suspension mods are recommended for a built rear end, and front. I want to keep the car a 5 speed, and don't intend on competing on the track for all intensive purposes. Not saying that I won't take it there, but not going to on a regular basis. If someone could make up a detailed list of parts for a built rear end I would really appreciate it. I have done some looking around and know that you need 31 spline axles, but alot of what I read is greek to me as well. Also if anyone is from Iowa or knows a good shop in Iowa to do some of the work at I would appreciate a recommendation. :yes: |
Re: Sticky Suspension Thread
Never noticed this thread. In the pic I have:
Eibach Pro Kit No ISOs up front Top ISO only in the back KYB Adj shocks in the back Stock Struts MM CC plates Jegs Upper and Lower Control Arms MM FLSFC Since tire profile has a big effect on suspension appearance I'm running (245 45 17 and 275 40 17) http://i182.photobucket.com/albums/x...aleMach1_2.jpg |
Re: Sticky Suspension Thread
Quote:
Wrong section bro. Post this up in the engine and drivetrain section. I'd answer your question here, but since its a sticky we should keep it on topic :thumbsup: |
Re: Sticky Suspension Thread
Quote:
I'm new to suspension, so I might have some dumb question. But my goal is to have a great handling car, and I know coilovers will be the way to get there. I'd prefer not to have to get the whole kit, meaning the rear, cus on the mm site the whole kit is over 1k I believe. Edit: Think I may have posted this in the wrong section. Appologies if I did. |
Re: Sticky Suspension Thread
|
Re: Sticky Suspension Thread
get some more rides posted up
ASh |
Re: Sticky Suspension Thread
SVE Lowering springs, stock shocks/struts and all original iso's (think I'm gonna pull em out).
http://i761.photobucket.com/albums/x...H/DSC00514.jpg http://i761.photobucket.com/albums/x...H/DSC00263.jpg |
Re: Sticky Suspension Thread
Eiabach Sportlines. All isos in.
http://i40.photobucket.com/albums/e2...2004AB7F7A.jpg Also, will these struts work well for me with my drop?! http://www.americanmuscle.com/bilste...trut-8704.html |
Re: Sticky Suspension Thread
^^^ They should work wonderfully.
Also, everything about your car is great. No vinyl, silver Cobra R's... Awesome work! |
Re: Sticky Suspension Thread
Here's mine:
Tokico illuminas 5 way adustables Stock mach 1 springs, 1 coil cut in the front, untouched in the rear rear lower Maximum Motorsports control arms http://sphotos-a.ak.fbcdn.net/hphoto...37217675_o.jpg |
Re: Sticky Suspension Thread
Quote:
|
Re: Sticky Suspension Thread
stock wheels and tires, STOCK springs cut one coil in front, still as the iso rubber pad thing. The rear susp hasnt been touched, and the car has no rear seats, spare or front sway bar
http://i474.photobucket.com/albums/r...psd1e80d59.jpg http://i474.photobucket.com/albums/r...ps6f884319.jpg |
Re: Sticky Suspension Thread
1 Attachment(s)
Here is mine, just took this picture today.
1. Koni yellows all four corners with Rouge Engineering remote adjusters in the trunk 2. H&R race springs no isolators 3. MM caster camber plates 4. MM rear lower control arms 5. MM full length sub frame connectors So far I LOVE my set up, in the near future I plan on adding much more. |
Quote:
Nice! This is the exact drop I'm looking for. SVE springs are still for sale on LMR, but they say "new improved". Wonder what's different? IG: @azurebluemach |
Re: Sticky Suspension Thread
UPR non adj U/L
Strange 10 way Stock rear springs with U/L iso's cut 1/2 coil on front springs with U/L iso's KYB 4 way adjust struts Fill length Steeda SBF connectors Nitto N555 275/40 17, same size MT ET streets DR on track days http://i.imgur.com/cQyok1bl.jpg |
All times are GMT -4. The time now is 12:19 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com