Cruise control not working.
I checked all fuses, any ideas what may be wrong. How does the cruise control system work? Then I might be able to trace the issue. BTW I have stock throttle body. Only mods that may affect are are clutch quadrant and firewall adjuster. I thought maybe the pedal wasnt springing back enough causing the car to not go into cruise.
|
Re: Cruise control not working.
Could be:
Cruise button on steering wheel (or connection) Clockspring (horn work? Airbag light on?) Module or connection (LF footwell behind splash shield) Cable busted or disengaged from module Cable off of TB or pulling through bracket |
Re: Cruise control not working.
Quote:
|
Re: Cruise control not working.
well if your horn works and no airbag light then clockspring is ok, id check under the hood at the tb and make sure the cable didnt come off and also check to make sure that the plugs in the CC module in the driver footwell behind splash shield are connected... if all thats ok then it might be time to go into the dealership...
|
Re: Cruise control not working.
Quote:
|
Re: Cruise control not working.
what about the deactivation switch?...
|
Re: Cruise control not working.
Is it possible to get a skematic of the cruise control system? Originally I started having issues when the firewall adjuster was not adjusted properly due to me having pulled the clutch cable too much making it too tight at the tranny and too much slack at the firewall adjuster. I would have to put my foot under the clutch pedal and pull up on it to make the cruise work. Now I fixed the cable everthings good there, the cruise just wont work. I figure that may have something to do with it so if I can see a diagram then I may be able to better trace it.
In worst case I have to buy a new servo correct? And thats about 60? |
Re: Cruise control not working.
How do I find the CPP switch? (clutch pedal position switch)
|
Re: Cruise control not working.
Follow the clutch pedal up under the dash.
|
Re: Cruise control not working.
How can I trouble shoot the different things? CPP, Servo, etc??
Thanks, John |
Re: Cruise control not working.
Bump, anyone know how to trouble shoot??
|
Re: Cruise control not working.
If U had a White Mach Im sure U wouldnt have this problem. :23:
|
Re: Cruise control not working.
Quote:
|
Re: Cruise control not working.
5 Attachment(s)
See if this helps you.
Sorry that I did not get the first couple of pages in order |
Re: Cruise control not working.
5 Attachment(s)
I dont know why, but they do not post in the order I save them.
|
Re: Cruise control not working.
3 Attachment(s)
Last batch
|
Re: Cruise control not working.
Quote:
Quote:
|
Re: Cruise control not working.
Hey JJ (Apollo240) , ur cruise Conttrol dosent work cause i Pissed all over ur Electronics. hahah :23:
|
Re: Cruise control not working.
Quote:
|
All times are GMT -4. The time now is 12:56 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com