2003-04 Mach 1 Registry Owners Club

2003-04 Mach 1 Registry Owners Club (http://www.mach1registry.org/forums/index.php)
-   Mustangs Parts For Sale/Wanted (http://www.mach1registry.org/forums/forumdisplay.php?f=8)
-   -   BMR Adjustable LCAS (http://www.mach1registry.org/forums/showthread.php?t=136597)

JDraper 08-29-2018 06:04 PM

BMR Adjustable LCAS
 
1 Attachment(s)
**SOLD**
For sale, 1 set of BMR adjustable LCAS, only installed for fitment. ( Ended up with 2 sets and left the other set on). They list new on sale at $189. Will sell for 125+ shipping

sutyak 08-30-2018 10:09 AM

Re: BMR Adjustable LCAS
 
I have these, but with the Magnaflow catback the rear sway bar hits the exhaust pipes. So for the moment I have no rear sway bar until I make a bracket to change the angle.
Aside from the lack of sway bar I like these. Depending on which ones these are, they may also require drilling to accommodate larger bolts.

JDraper 08-30-2018 11:13 AM

Re: BMR Adjustable LCAS
 
Quote:

Originally Posted by sutyak (Post 1632449)
I have these, but with the Magnaflow catback the rear sway bar hits the exhaust pipes. So for the moment I have no rear sway bar until I make a bracket to change the angle.
Aside from the lack of sway bar I like these. Depending on which ones these are, they may also require drilling to accommodate larger bolts.

These do not require drilling to take the factory size bolts. The swaybar issue can be addressed by drilling new holes in the mount to shift the swaybar forward. I did that with the LCAS that are currently on my car so they cleared my Borla exhust.

ab_mach1 08-30-2018 12:30 PM

Re: BMR Adjustable LCAS
 
Looks like they have the sway bar mounting holes already...? Are they just not in the right location?

JDraper 08-30-2018 03:14 PM

Re: BMR Adjustable LCAS
 
1 Attachment(s)
Quote:

Originally Posted by ab_mach1 (Post 1632452)
Looks like they have the sway bar mounting holes already...? Are they just not in the right location?

Depends upon the exhaust. I had to move the swaybar mount location on the set that is on my Mach. It was tapping the pipes (I have Borla Stingers) during suspension compression when mounted in the pre drilled holes. See attached for the setup currently on my Mach. You can see the pre drilled hole just below the swaybar.

On edit, I had a conversation with BMR about this when I bought the LCA's and they said that they were planning on adding adjustability to the swaybar position in future designs.

JDraper 10-14-2018 02:53 PM

Re: BMR Adjustable LCAS
 
Sold


All times are GMT -4. The time now is 08:27 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com