2003-04 Mach 1 Registry Owners Club

2003-04 Mach 1 Registry Owners Club (http://www.mach1registry.org/forums/index.php)
-   Technical Q&A. HOW TO's, TSB's & Warranty Items (http://www.mach1registry.org/forums/forumdisplay.php?f=23)
-   -   Technical Service Bulletins (TSB's) (http://www.mach1registry.org/forums/showthread.php?t=8375)

03mach1 11-05-2003 08:42 PM

Technical Service Bullitens (tsb's)
 
Here are some of the LATEST TSB'S on MUSTANGS in general.

There are some of the problems/Fixes for Mustangs.
SOME are MACH 1/Cobra related

PLEASE DO NOT USE OUT OF CONTEXT. MOST ARE NOT FOR THE BACKYARD MECHANIC. THESE ARE FORD MECHANIC PROCEDURES.
PLEASE, DO NOT TAKE IT TO YOUR DEALER UNLESS YOU HAVE THE PROBLEM....!!!
NOTE:The information in Technical Service Bulletins is intended for use by trained, professional technicians with the knowledge, tools, and equipment to do
the job properly and safely. It informs these technicians of conditions that may occur on some vehicles, or provides information that could assist in proper
vehicle service. The procedures should not be performed by "do-it-yourselfers". Do not assume that a condition described affects your car or truck. Contact a
Ford, Lincoln, or Mercury dealership to determine whether the Bulletin applies to your vehicle.


These may help us diagnose some of the current things owner's are experiencing.
ADOBE ACROBAT READER REQUIRED (http://www.adobe.com/products/acrobat/readstep2.html)
---------------------------------------------------------------
***SHAKER RATTLE ***
http://www.mach1registry.com/databas...ker rattle.pdf

(*NEW) AUTOMATIC TRANSMISSION GEAR **
http://www.mach1registry.org/images/...TRANS_GEAR.pdf


*** MUSTANG COBRA - TICK NOISE FROM ENGINE (Possible Mach1)
http://www.mach1registry.com/databas...OM ENGINE .pdf

A-C SERVICE TECH TIPS
http://www.mach1registry.com/databas... TECH TIPS.pdf

APPROVED PAINT MATERIALS FOR WARRANTY REPAIRS
http://www.mach1registry.com/databas...Y REPAIRS .pdf

CHECK FUEL CAP LAMP ILLUMINATED
http://www.mach1registry.com/databas...LUMINATED .pdf

COOLING SYSTEM - SERVICE TIPS
http://www.mach1registry.com/databas...VICE TIPS .pdf

ELECTRICAL - REMOTE KEYLESS ENTRY
http://www.mach1registry.com/databas...LESS ENTRY.pdf

ENGINE - 4[1].6L 2V - TICK NOISE FROM ENGINE - ENGINES
http://www.mach1registry.com/databas... - ENGINES.pdf

ENGINE MISFIRE OR ROUGH RUNNING
http://www.mach1registry.com/databas...H RUNNING .pdf

ENGINE OIL LEVEL INDICATOR MARKINGS
http://www.mach1registry.com/databas... MARKINGS .pdf

FUEL PRESSURE RELIEF VALVE (SCHRADER VALVE) DISCONTINUED
http://www.mach1registry.com/databas...CONTINUED .pdf

INADVERTENT DISABLING OF BRAKE SHIFT INTERLOCK
http://www.mach1registry.com/databas...INTERLOCK .pdf

(**NEW) EXTERIOR MIRROR REPLACEMENT
http://www.mach1registry.org/images/...RROR_GLASS.pdf

NEW TRANSMISSION COOLER FLUSHER - SERVICE TIPS
http://www.mach1registry.com/databas...VICE TIPS .pdf

NOISE - WINDNOISE FROM THE PILLAR AREA
http://www.mach1registry.com/databas...LLAR AREA .pdf

PAINT - PLASTIC BUMPER FASCIA PARTS
http://www.mach1registry.com/databas...CIA PARTS .pdf

(**NEW) PAINT DELAMINATION - HOODS
http://www.mach1registry.com/images/...LAMINATION.pdf

REAR WINDOW DEFROSTER GRID DIAGNOSIS
http://www.mach1registry.com/databas... DIAGNOSIS.pdf

SOLDERING AND CRIMPING REPAIRS
http://www.mach1registry.com/databas...G REPAIRS .pdf

STRAIGHTEDGE PROCEDURE FOR CHECKING CYLINDER HEAD AND BLOCK FLATNESS
http://www.mach1registry.com/databas... FLATNESS .pdf

SURGE ROLLING IDLE - GEAR DRIVEN SYNCHRONIZERS INCORRECT INSTALLATION
http://www.mach1registry.com/databas...TALLATION .pdf

SUSPENSION - CLUNK OR POP NOISE FROM REAR SUSPENSION - MUSTANG COBRA ONLY
http://www.mach1registry.com/databas...OBRA ONLY .pdf

SUSPENSION - DRIFT OR PULL TO RIGHT OR LEFT - MUSTANG COBRA MODELS
http://www.mach1registry.com/databas...RA MODELS .pdf

ALLDATA TSB's on the Mach 1's
TSB Number Issue Date TSB Title
03-15-1 AUG 03 Rear Window Defroster - Inoperative
03-14-8 JUL 03 A/T - Cooler Flushing Service Tips
03-14-4 JUL 03 Ignition System - Engine Misfire Diagnostic Tips
03-11-6 JUN 03 Electrical - Wiring Soldering/Crimping Tips
03-11-4 JUN 03 Engine - Left Hand Side Ticking Noise
03-9-8 MAY 03 Emissions - MIL ON/EVAP System DTC's Set
03-9-5 MAY 03 Suspension - Rear Suspension Clunk/Pop Noise
03-8-3 APR 03 Engine - Oil Level Indicator Markings
03-1-5 JAN 03 Interior - Passenger Seat Squeaking Sound
02-23-7 NOV 02 Cooling System - Premium Gold Coolant Service Info
02-23-3 NOV 02 Fuel System - Fuel Pressure Relief Valve Discontinued
02-22-1 NOV 02 Engine Controls - Engine Surge/Rolling Idle/DTC's Set
02-21-13 OCT 02 Engine - Cylinder Head Straightedge Surface Check
02-20-8 OCT 02 A/C System - Diagnosis and Service Tips
02-17-6 SEP 02 A/T - Inadvertent Shift Interlock Disabling


http://www.alldata.com/TSB/19/031917e6.html

TREMEC T3650 2-3 Gear Problems
http://www.mach1registry.com/databas...tsb_3650_1.jpg
http://www.mach1registry.com/databas...tsb_3650_2.jpg

loveOliver 11-06-2003 12:59 AM

cool

rcode99 11-06-2003 02:07 AM

Dave,

Thanks for consolidating this info for us.:THUMBSUP:

Numach14me 11-06-2003 10:49 PM

Dave, Thanks for making this happen :COOL:

n9xrg 12-07-2003 01:49 AM

Why I LOVE this site
 
Great information source. Thank you

Red Mach'03 12-07-2003 06:40 AM

Thanks Dave u always come throgh for us.:THUMBSUP:

badjoey 12-07-2003 09:49 AM

that's quite a list,,,thanks dave

04BlackMach 12-12-2003 06:21 AM

Thank you Dave, this list has been very helpful. :THUMBSUP:

tach9 01-01-2004 11:15 PM

Since you last posted this back in November, are there any more TSB's or SSM's we should be concerned with? I'm taking the Mach in next week and want to make sure I have all my "ammo" in line!!! Thanks all in advance for any more info you can provide...!!! Especially onteh SSM side!!!

rcode99 01-02-2004 01:14 AM

Someone posted this 2 days ago, but I have no way of verifying it.

TSB 03-25-5, dated December 11, 2003 - Paint - pin holes and/or paint delamination in vehicle hood - vehicles built 6/1/01 thru 3/1/2003 only.

Whoever posted it gave this URL, but I think I missed a digit or 2 on the end.

http://www.fordtechservice.dealerco...ENI4/T32 (The rest didn't print out when I printed it.

Sorry folks. Perhaps someone has access to this info. Hope it help.

1badpony00 01-02-2004 01:41 AM

Gotta love this thread. Heard my back end pop twice yesterday, and came here to check the TSB's. Printed it out to take to work with me tomorrow and have it checked out.

Thanks guys :)
~Donna

tach9 01-06-2004 12:54 AM

Hey All, In preparation of taking my Mach into the dealer on Wed.... I have been downloading and printing off the various TSB's here so that I'll be armed for the Service Writer :) I have a problem though, when I tried to print the TSB on the wind noise from the pillar problem, I get these huge circles of black all over the page. Anyone else have this problem with this particular TSB? It's only this TSB as I have successfully printed off the others that were pertinent. Anyone else...solutions? TIA....

03mach1 01-27-2004 08:32 PM

Got the paint one listed! Thanks!

3 New ones! marked as (**NEW)

Thanks Jeffrey!!

Explorer 01-30-2004 07:51 PM

Both of the TSBs I need to see have dead links. I need to see the "oil level indication" and the "rough idle".

Thanks.

fjt226 01-31-2004 11:57 PM

Thanks for compiling this information. It is a great help for those of us interested in this sort of thing.

zammit 02-08-2004 09:24 AM

engine build date
 
Where do i look to find the engine build date........car was built on
04/09/03 Just curious should i be expecting the ticking noise. My Mach now has 320 miles on it.

POLSMACH03 02-13-2004 03:20 PM

Zammit from TSB 03-16-4.............

Engine build date is typically found on the engine label located on the valve cover.

loveOliver 03-01-2004 06:55 PM

The lower six links aren't working

HAEG 03-03-2004 11:41 PM

Stuck Seat Belt
 
Anyone know of a TSB for the passenger seat belt getting stuck tight against the passenger and not releasing. This happens to my wife and she has to unlock the belt let it recoil all the way back in and have to play with it to get it lose and pull back out lock it and then a few minutes later it does it again. Has anyone else have this happen.

wolverine81 03-11-2004 06:16 PM

I've had it happen in all three of the mustangs I have owned, it sucks because she gets ticked off everytime it does it. I have never heard of any possible fixes or recalls, but there may be some out there.

SHAKEN 06-20-2004 08:47 PM

Tick
 
Yeah got mine last night here is what oasis had to say (friend of mine is a Ford Senior Tech) will be heading for the dealer monday morning

SYMPTOM CODE INFORMATION
497000 - ENGINE NOISE CONCERNS

SPECIAL SERVICE MESSAGES
17858 2003-2004 MUSTANG 4.6 4V - ENGINE TICKING NOISE

SOME 2003-2004 MUSTANGS WITH A 4.6L 4-VALVE ENGINE MAY EXHIBIT A TICKING
NOISE FROM THE CYLINDER HEAD THAT CAN BE HEARD COMING FROM THE WHEELWELL
AREA, OR WHEN STANDING NEXT TO THE VEHICLE. A LIGHT TICKING NOISE IS
CONSIDERED NORMAL ON THIS ENGINE. IF THE NOISE IS DETERMINED TO BE EXCESSIVE,
FOLLOW NORMAL DIAGNOSTIC PROCEDURES TO DETERMINE ROOT CAUSE. ENGINEERING IS
CURRENTLY INVESTIGATING THIS CONDITION. MONITOR OASIS FOR UPDATES.
EFFECTIVE DATE: 06/09/2004



--------------------------------------------------------------------------------

16354 2000-2003 MUSTANG COBRA 4.6L 4V, 2000-2003 NAVIGATOR AND 2002 BLACKWOOD 5.4L 4V - ENGINE TICKING NOISE IN UPPER AREA OF CYLINDER HEAD(S)

SOME 2000-2003 COBRA EQUIPPED WITH A 4.6L 4V ENGINE, 2000-2003 NAVIGATOR
AND 2002 BLACKWOOD EQUIPPED WITH A 5.4L 4V ENGINE, MAY EXHIBIT A TICKING
NOISE FROM THE AREA OF THE UPPER CYLINDER HEAD. THE CONDITION IS MORE
NOTICEABLE WHEN ENGINE IS WARM. TO SERVICE, USE A STETHOSCOPE TO ISOLATE THE
NOISE. CHECK ENGINE OIL PRESSURE AT IDLE. WITH CAM COVERS REMOVED, OBSERVE
OIL FEED PRESSURE AT EACH CYLINDER HEAD. INSPECT FOR VALVE TRAIN DAMAGE. CK
TENSIONERS, CAMSHAFT SPROCKETS OR FOR A MISSING SPACER BEHIND THE SPROCKETS &
LASH ADJUSTERS. SERVICE AS REQUIRED. REMOVE FRONT INTAKE CAMSHAFT LADDER
(ONE CAM LADDER AT A TIME) & INSPECT THE CAMSHAFT LADDER BOSSES FOR DEBRIS.
CLEAN SURFACE AND REINSTALL LADDER. TORQUE THE BOLTS TO 10 NM, STARTING FROM
THE CENTER BOLTS AND OUTWARD. REPEAT PROCESS FOR REMAINING LADDERS.
EFFECTIVE DATE: 10/24/2002



I hope the light noise the refer too is injector noise

03mach1 07-28-2004 09:13 AM

Tremec 3650 FIX!
 
Here you go!!

http://www.mach1registry.com/databas...tsb_3650_1.jpg

http://www.mach1registry.com/databas...tsb_3650_2.jpg

SGSCOMPS 08-02-2004 12:42 PM

Does anyone know if there is a TSB out for the front end sqeek on the steering rack bushings? I'm taking mine in on Wednesday morning and would like to have the number/printout if possible.

Thanks in advance

GOTdaBLUE1 08-03-2004 03:30 AM

Quote:

Originally posted by SGSCOMPS
Does anyone know if there is a TSB out for the front end sqeek on the steering rack bushings? I'm taking mine in on Wednesday morning and would like to have the number/printout if possible.

Thanks in advance

No TSB that I know of. However, the squeak or creak, is a common Mustang problem. Have them replace the rack and pinion mounting bushings and the bolt sleeves. This is covered by the warranty. Had mine replaced at 2,600 miles.

Parts:

Qty-

2@ 2R3Z-3F640-AA
2@ E5DZ-3F640-B
2@ E5DZ-3K620-A
2@ F7AZ-3F823-AA
1@ PM-4

Good luck :CHEERS:

1badpony00 10-07-2004 11:25 AM

I'm looking for a TSB on the A/C Clunk and the starting problem (sputters, sometimes won't start, etc).

Any linkys for those that you guys know of?

~Donna


All times are GMT -4. The time now is 07:33 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com