I found a source for Mach 1 ID Tags!
 

I found a source for making the Mach 1 ID tags that are no longer available from this site. :thumbsup: He is presenting making ID tags for a SVT Cobra Club. I sent him a photo (also attached here), and he said that it would be no problem to produce them. He would like to have more than just a couple of orders, so please respond if interested!!

Re: I found a source for Mach 1 ID Tags!
 

I missed out on the first guy so I'm in on this one. Let me know what you need. :machgod:

Re: I found a source for Mach 1 ID Tags!
 

Just getting a total number of people interested to let him know. If he says he will do it, then I'll post his info. Thanks!!

Re: I found a source for Mach 1 ID Tags!
 

I'd be interested let us know the details . Thanks

Re: I found a source for Mach 1 ID Tags!
 

i am in

would like a large and small one like Big Ron

Re: I found a source for Mach 1 ID Tags!
 

Looks like Dave Groat't work. Is itbhis or someone else's?

Re: I found a source for Mach 1 ID Tags!
 

Count me in !!

Re: I found a source for Mach 1 ID Tags!
 

I want both let me know how to order. would like my name on them like the orginal one were.

Re: I found a source for Mach 1 ID Tags!
 

I would also want both of them. How can I find my build date and number?

Re: I found a source for Mach 1 ID Tags!
 

same here

Re: I found a source for Mach 1 ID Tags!
 

I want both large ang small. Possibly two sets (one is spare incase the first fades again).

Re: I found a source for Mach 1 ID Tags!
 

I'm in! How much does the one for the engine cost?

Re: I found a source for Mach 1 ID Tags!
 

add me to the list!!

Re: I found a source for Mach 1 ID Tags!
 

interested. whats the price?

Re: I found a source for Mach 1 ID Tags!
 

I'd be interested in a couple of replacements. I would also like to know if he would be able to do a custom, one-off engine plate.

Re: I found a source for Mach 1 ID Tags!
 

Count me in too! both the bigger one for the engine bay and the small one for in front of the shifter!

Re: I found a source for Mach 1 ID Tags!
 

Interested...

I ordered mine a little b4 the last guy stopped doing them so mine are fine.. but id love a spare just in case.

Thanks for looking into this and posting it!

I'm in for both! Can we get a cost estimate on them? And bump on the build date/number.

I'll take both!!

Is this the guy that was on SVTperformance?

Re: I found a source for Mach 1 ID Tags!
 

Count me in as well! PM me details when they come out.

Re: I found a source for Mach 1 ID Tags!
 

im in. PM me details when they come out as well

thanks

Re: I found a source for Mach 1 ID Tags!
 

Looks like there is a good interest for these. I'll try to answer everyone questions in this post:

The sample I posted was from the previous vendor from this site and used as a sample. I have not got a photo from this guy yet, but he said he can duplicate it.

No prices yet, just seeing if there was enough interest before this guy committed to making them for us

I only sent him the engine compartment size, I did not ask about the one for the inside.

Can someone send me the size on the inside plaque? I'll ask him about that one also??

Re: I found a source for Mach 1 ID Tags!
 

My inside tag measures: 3 1/2" long by 1 1/2" wide

http://i27.photobucket.com/albums/c1...CHIDTAG002.jpg

I'm interested in both as well.


Sent from my iPhone using Tapatalk

Re: I found a source for Mach 1 ID Tags!
 

Put me down for the engine compartment and interior ID plates as well!!

Re: I found a source for Mach 1 ID Tags!
 

I'll want both, count me in
Bill

Re: I found a source for Mach 1 ID Tags!
 

Interested in engine one x 2.

Re: I found a source for Mach 1 ID Tags!
 

Should it be shorten a tad? Looks kinda crouded in there.

Re: I found a source for Mach 1 ID Tags!
 

I am very interested!!!!

Re: I found a source for Mach 1 ID Tags!
 

Would be cool to have the factory hp and tq ratings as well at the bottom.

My '02 Roush 360R had that on the id tag and I thought it was cool.

How about:

VIN
Production date
Hp and Tq
Owner

Re: I found a source for Mach 1 ID Tags!
 

im in on both let me know

Re: I found a source for Mach 1 ID Tags!
 

I'm in!

Re: I found a source for Mach 1 ID Tags!
 

Depending on the price and stuff, I would be interested in both as well.

Re: I found a source for Mach 1 ID Tags!
 

I'm interested as well let me know the payment info

Re: I found a source for Mach 1 ID Tags!
 

I have a set of the orginals, but they don't have the build number on them. If the new set includes the build number, you can count me in for both...

Re: I found a source for Mach 1 ID Tags!
 

Add another one that is interested in both to the list.

Re: I found a source for Mach 1 ID Tags!
 

Build number would be a welcomed addition...count me in.

Re: I found a source for Mach 1 ID Tags!
 

i would take one of both

Re: I found a source for Mach 1 ID Tags!
 

another one...may be easier to just make a poll instead of counting individual post answers....no??

Re: I found a source for Mach 1 ID Tags!
 

I sent my Mach tag today to the maker for an example. He is going to send me a sample tag that he will be able to offer us. It may be a little different, but the overall quality should be better. As soon as I receive the sample, I'll post a photo, costs, and info for others. Hope this works out for all of us.

Re: I found a source for Mach 1 ID Tags!
 

Cool :orange:

Re: I found a source for Mach 1 ID Tags!
 

Sweet! :CHEERS:

Re: I found a source for Mach 1 ID Tags!
 

pretty cool..

Re: I found a source for Mach 1 ID Tags!
 

Looking forward to seeing it. :yes:

Re: I found a source for Mach 1 ID Tags!
 

Why don't you guys wait until everything is in place and ready to order, sounds like there is enough interest, so the guy should be able to produce them.

Thanks for helping others out that may have not ordered them.....please keep us informed on the details, pricing, how to order, etc...

Interested as well. Too bad they cant be engraved instead of printed.

Re: I found a source for Mach 1 ID Tags!
 

Might be interested too. Waiting to see details and price.

Re: I found a source for Mach 1 ID Tags!
 

He is talking about engraving!! I asked the same question and looks like that is what is going to be offered!! I will post a photo and all the details when it arrives. It may be more $$, but it sounds like the quality will be over the top!

Re: I found a source for Mach 1 ID Tags!
 

Okay. He wanted to see if there was a demand before committing.

Re: I found a source for Mach 1 ID Tags!
 

I'm thinking demand is not going to be an issue, don't you? Of course, demand might drop if the price point is too high!