Max power output of a P-1SC on a Mach 1?
Is a Procharger P-1SC supercharger capable of making 600 rwhp on a 2003-04 Mach 1 if it has free-flowing exhaust, intake/bigger throttle body, forged rotating assembly (near stock compression ratio), 3.73 gears, aluminum driveshaft, and upgraded fuel system (bigger injectors, dual fuel pumps, voltage boosters, etc...) on pump gas?
|
Re: Max power output of a P-1SC on a Mach 1?
You'd be asking a lot of it imho, especially if the cams are still stock.
|
Re: Max power output of a P-1SC on a Mach 1?
Quote:
HAha! You listen to Alex, huh? I don't know about the P1SC though. I have a P1SC-2 and it should be good for it. But it'd be working. |
Re: Max power output of a P-1SC on a Mach 1?
Quote:
|
Re: Max power output of a P-1SC on a Mach 1?
Quote:
|
Re: Max power output of a P-1SC on a Mach 1?
Quote:
|
Re: Max power output of a P-1SC on a Mach 1?
Quote:
|
Re: Max power output of a P-1SC on a Mach 1?
D1 will be worth it if you need to make that kind of power. Spinning the p1 that hard will make too much heat, be too risky with gasoline and you'll likely still fall short of 600.
|
Re: Max power output of a P-1SC on a Mach 1?
I don't see it happening on pump gas but I made 601/524 on a dyno-jet with a p1sc 12 psi and e85.
|
Re: Max power output of a P-1SC on a Mach 1?
Quote:
|
Re: Max power output of a P-1SC on a Mach 1?
Quote:
|
All times are GMT -4. The time now is 05:45 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com