2003-04 Mach 1 Registry Owners Club

2003-04 Mach 1 Registry Owners Club (http://www.mach1registry.org/forums/index.php)
-   Mustangs Parts For Sale/Wanted (http://www.mach1registry.org/forums/forumdisplay.php?f=8)
-   -   Some parts for sale (http://www.mach1registry.org/forums/showthread.php?t=136045)

Cooldbz12 06-23-2017 05:54 PM

Some parts for sale
 
1 Attachment(s)
Here are some parts i had left over from the eaton swap. Pics opon request.
Prices do not in include shipping. Parts have 60k miles on them. K&n has about 15k.


EGR Valve: $30 Shipped.

OEM Instrument Bezel: 20$ *Just Added

K&N FIPK2 CAI connects to shaker: 80$ (pics on post 10) *SOLD

Timing cover: $80 *SOLD

Mach 1 Coolant crossover tube (no rust): 40$ *SOLD

03 Cobra Coolant Crossover tube (A little rust):40$ *Just Added

Factory thermostat and housing: 40$ *SOLD

2 OEM Mass air flows: 40$ each. (pics on post 10) *SOLD

Upper intake: $60 *NEW PRICE *SOLD

Lower intake: $100 *SOLD

Stock Throttle Body: $35 *NEW PRICE *SOLD

Stock fuel rails:$40 *SOLD

stock Ignition coils (8): $100 *NEW PRICE

Stock Fuel pump and hat w/ level arm: $40 *NEW PRICE

VDO black water elec. temp gauge w/ sending unit: $25

I also have random hoses if you need one i might have it.

Willing to trade for these parts:

new LFP Dual Pass Heat Exchanger
black coated supercharger coolant tank
black coated Coolant Expansion Tank
black "TERMINATOR" Radiator cover
"Mustang" or "Mach 1" Door Sill Plates
Prepainted torch red MMD Quarter Window Louvers
Nvidia GTX 1080 Graphics card

frijol79 06-24-2017 08:02 PM

Don't happen to have hose, from passenger side valve cover to intake tube


Sent from my iPhone using Tapatalk

Cooldbz12 06-25-2017 09:24 PM

Re: Some parts for sale
 
Quote:

Originally Posted by frijol79 (Post 1627260)
Don't happen to have hose, from passenger side valve cover to intake tube


Sent from my iPhone using Tapatalk

Yes i do. Pm sent.

auto02 06-28-2017 05:41 AM

Re: Some parts for sale
 
Is the fuel rail still available?

Cooldbz12 06-28-2017 01:21 PM

Re: Some parts for sale
 
Quote:

Originally Posted by auto02 (Post 1627317)
Is the fuel rail still available?

Yes both fuel rails are available.

mikeracing 06-28-2017 06:49 PM

Re: Some parts for sale
 
I'll take the lower for 100

auto02 06-28-2017 07:12 PM

Re: Some parts for sale
 
Pm sent.

Cooldbz12 06-28-2017 08:43 PM

Re: Some parts for sale
 
Quote:

Originally Posted by mikeracing (Post 1627329)
I'll take the lower for 100

PM Replied

F10003Mach1 06-29-2017 08:23 PM

Re: Some parts for sale
 
Can i get pic for both maf and k&n cai

Cooldbz12 06-30-2017 12:03 AM

Re: Some parts for sale
 
4 Attachment(s)
Quote:

Originally Posted by F10003Mach1 (Post 1627346)
Can i get pic for both maf and k&n cai

Here you go man, Dont mind the dust cant keep it out no matter what you do in west texas.

http://www.mach1registry.org/forums/...1&d=1498795332

http://www.mach1registry.org/forums/...1&d=1498795332

http://www.mach1registry.org/forums/...1&d=1498795332

http://www.mach1registry.org/forums/...1&d=1498795332

32VALVR 06-30-2017 01:33 AM

Re: Some parts for sale
 
Interested in the coils. What parts are you looking for a trade?

F10003Mach1 06-30-2017 02:02 AM

Re: Some parts for sale
 
Pm sent

Cooldbz12 06-30-2017 08:54 AM

Re: Some parts for sale
 
Quote:

Originally Posted by 32VALVR (Post 1627356)
Interested in the coils. What parts are you looking for a trade?

31 spline axles
black coated supercharger coolant tank
black coated Coolant Expansion Tank
3x5 Ford Racing flag
black "TERMINATOR" Radiator cover
"Mustang" or "Mach 1" Door Sill Plates
Prepainted torch red MMD Quarter Window Louvers
Nvidia 1080 Graphics card

If you have something else let me know.

32VALVR 07-01-2017 01:36 AM

Re: Some parts for sale
 
Unfortunately I don't have anything you're looking for. I have the following, if memory serves.
CDC Mach floor mats in used only for show condition.
Two sets of stock Mach floor mats in good condition.
Stock Mach 28 spline axles.
Stock non IUP headrests in perfect condition.
Stock throttle body.
Stock EGR and plumbing.
Stock shaker mounting brackets.
Stock upper and lower intake manifold.
Ford pony mud flaps for the rear.
Maybe more, I'll check my garage tomorrow.

Cooldbz12 07-01-2017 11:14 AM

Re: Some parts for sale
 
Quote:

Originally Posted by 32VALVR (Post 1627375)
Unfortunately I don't have anything you're looking for. I have the following, if memory serves.
CDC Mach floor mats in used only for show condition.
Two sets of stock Mach floor mats in good condition.
Stock Mach 28 spline axles.
Stock non IUP headrests in perfect condition.
Stock throttle body.
Stock EGR and plumbing.
Stock shaker mounting brackets.
Stock upper and lower intake manifold.
Ford pony mud flaps for the rear.
Maybe more, I'll check my garage tomorrow.

If you really want the coils i can do 100 shipped.

Cooldbz12 07-25-2017 03:58 PM

Re: Some parts for sale
 
bump

Khyren 07-28-2017 10:21 AM

Re: Some parts for sale
 
Do you happen to have the cross over pipe that comes out of the back of the passenger side head?

Oxford04auto 07-28-2017 06:47 PM

Re: Some parts for sale
 
You wouldn't have the stock intake tube would you?

Cooldbz12 07-29-2017 03:30 PM

Re: Some parts for sale
 
Quote:

Originally Posted by Khyren (Post 1627852)
Do you happen to have the cross over pipe that comes out of the back of the passenger side head?

Send me a picture, im not sure which one your talking about.

Quote:

Originally Posted by Oxford04auto (Post 1627858)
You wouldn't have the stock intake tube would you?

No i do not sorry.

Cooldbz12 09-23-2017 02:43 PM

Re: Some parts for sale
 
bump

patrick60 09-29-2017 03:33 PM

Re: Some parts for sale
 
Pm sent

st0ck Mach 1 02-22-2018 03:15 PM

Re: Some parts for sale
 
Still have the timing cover?

32VALVR 02-22-2018 11:52 PM

Re: Some parts for sale
 
Interested in the bezel. Is it just the plastic cover or does it include the gauges? if it does, is it auto or manual?
Thanks.

Cooldbz12 03-02-2018 11:22 AM

Re: Some parts for sale
 
Quote:

Originally Posted by st0ck Mach 1 (Post 1630041)
Still have the timing cover?

Yes still have it.

Quote:

Originally Posted by 32VALVR (Post 1630049)
Interested in the bezel. Is it just the plastic cover or does it include the gauges? if it does, is it auto or manual?
Thanks.

Just the grey plastic that goes over the gauges and has the hole for the headlight switch.

motzstang 03-16-2018 12:45 AM

Re: Some parts for sale
 
K&N CAI still available??? Shipped to 60097


All times are GMT -4. The time now is 06:23 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com