2003-04 Mach 1 Registry Owners Club

2003-04 Mach 1 Registry Owners Club (http://www.mach1registry.org/forums/index.php)
-   Tuning & Dyno Testing/Results (http://www.mach1registry.org/forums/forumdisplay.php?f=9)
-   -   Slp dyno results! (http://www.mach1registry.org/forums/showthread.php?t=36342)

stockmach1 06-19-2005 02:44 AM

Slp dyno results!
 
1 Attachment(s)
:smokin: well Im pretty exited. I have an 03 5speed mach. I have put on php intake spacer and c&l cai with maf. Didnt really notice a difference. Dyno it this morning and put down 280rwhp and 305rwtq. I purchased slp LT headers, o/r shorty x-pipe, and lmII catback. My friend refered me to this guy who really only works on vettes and f-bodys but he would install everything for 400 bucks! so of course i jumped on it. 12 hours later he finally finishes so Im there with all of my fbody friends and were all thinking 300rwhp to 310rwhp, so we strap her up and let her rip. its insanely loud at wot. ( but very quiet at idle or low rpms ) well lets just say all there mouths dropped. Thanks slp :yeh: :hail1: put down 324rwhp and 337rwtq. thats a 44rwhp gain and 32rwtq. This is without a tune. Im not sure if a tune is going to help or hurt my numbers so if anyone can take a look at the dyno chart and explain it to me a bit better that would be great. He didnt have time to put in the 410's so there going in next week. Oh yeah the mechanic told me that this was by far the hardest job he has ever had putting in headers. and for now on hes will do it for no less than 650, thats with the x-pipe and catback installed too though.

stockmach1 06-19-2005 02:55 AM

Re: Slp dyno results!
 
Sorry you cant really see the graph that good thats the biggest I could get it to upload it. If anyone knows how to make it bigger I can send them the file.

Orange whip 04 06-19-2005 03:50 AM

Re: Slp dyno results!
 
Quite impressive, SLP makes good products and they react very well to our machs. I think you gained the most power potential from your cat back and offroad X. Its amazing the power that frees up when you dont have cats in place. And yes, headers are a pain in the azz.

stockmach1 06-19-2005 03:54 AM

Re: Slp dyno results!
 
yeah i was pretty upset about him not getting around to putting in the gears until i saw the numbers

Orange whip 04 06-19-2005 04:04 AM

Re: Slp dyno results!
 
Thats ok, those number made up the difference for now. A step up in gears will better enhance the overall acomplishments.

lamach1 06-19-2005 11:44 PM

Re: Slp dyno results!
 
That's awesome. I love my SLP system. By the way, I picked up 14 rwhp from a custom tune. Wound up with 325 rwhp, but that was on a mustang dyno. I know gains from a tune can vary widely but if you could pick up 10 from a tune and 6 from an electric water pump that would be 340 rwhp or 400 fwhp just from bolt on's. :smokin: I really think it could be done and it would be great to see someone actully do it. I think the main reason we haven't seen 340 rwhp from bolt on's is because most people have changed to lower gears which give a lower dyno reading.

lamach1 06-19-2005 11:57 PM

Re: Slp dyno results!
 
Quote:

Originally Posted by Orange whip 04
Quite impressive, SLP makes good products and they react very well to our machs. I think you gained the most power potential from your cat back and offroad X. Its amazing the power that frees up when you dont have cats in place. And yes, headers are a pain in the azz.

When dynoed individually, I have usually seen the cat back get 8-10 max, and the off road x get 10 - 12 max which would leave 22 h.p. from the long tubes. I think it would be hard to tell exactly which part is making the most power, however SLP has to be producing a well engineered system with a gain of 44 rwhp. :worship:

stockmach1 06-20-2005 12:35 AM

Re: Slp dyno results!
 
Yeah my mustang hating buddies were shocked, his camaro only picked up 15rwhp from slp's full exhaust. So to make him feel better on the way home I showed him my bumper, he dynod 348rwhp with cams.

99GTCONV 06-21-2005 05:30 AM

Re: Slp dyno results!
 
hey lamach1, is your xpipe an offroad xpipe? I wonder how much performance gains i would see by taking out my hi flow cats in my xpipe. Is it really loud with the longtubes and no cats?

By the way you got tuned by one of the pioneers of the SCT company, Chris Johnson, so it doesn't surprise me that you are making 325rwhp.

lamach1 06-23-2005 08:02 PM

Re: Slp dyno results!
 
Quote:

Originally Posted by 99GTCONV
hey lamach1, is your xpipe an offroad xpipe? I wonder how much performance gains i would see by taking out my hi flow cats in my xpipe. Is it really loud with the longtubes and no cats?

By the way you got tuned by one of the pioneers of the SCT company, Chris Johnson, so it doesn't surprise me that you are making 325rwhp.

Yes, it's an off-road. It's easy to put on or rempve the cats with the SLP system. The only actuall back to back comparison that I've seen showed a gain of only 2 or 3 rwhp with the cats off. In that test they started with aftermarket high flow cats then went to an off-road x. Two things I can say are 1. aftermarket cats flow well and may not be worth removing unless you are looking for every last bit off power. 2. Every mod you make on the Mach is dependent on a retune. In the test I mentioned above, I suspect they would have picked up maybe 5 rwhp if they had retuned after removing the cats. Another example that I saw happened when I was getting my car tuned. After my car was finished I hung around and watched Chris working on a CAI for an 05 GT. He tuned the car and then put on a larger air filter. There was no change in the dyno results untill he retuned. It then picked up 2 rwhp. Anyway, I'm thinking that going from high flow cats to off-road x will probably make little difference without a tune. With a tune, you may see 3-5 rwhp which would be very little considering the cost of the off-road x and the tune.

CompMach 06-24-2005 04:59 PM

Re: Slp dyno results!
 
Nice Results, Just barely being able to read your Air/Fuel Chart looks like you hit 13 at Redline. Which is optimal or very close to I think. You might pick up a few more hp, might not...it's worth a shot though =) Congrats though. :yeh:

Mach0ne351 06-24-2005 05:09 PM

Re: Slp dyno results!
 
ya awesome #'s like all the mach1's i see :)......also your a/f is from 13.5:1 to 13.0:1....13.0 is the highest you should run..id say when you get it tuned, have the a/f around 12.8:1 to be on the safe side. being too lean isnt good :)

marek

rdksek844 07-02-2005 07:55 AM

Re: Slp dyno results!
 
Quote:

Originally Posted by stockmach1
:smokin: well Im pretty exited. I have an 03 5speed mach. I have put on php intake spacer and c&l cai with maf. Didnt really notice a difference. Dyno it this morning and put down 280rwhp and 305rwtq. I purchased slp LT headers, o/r shorty x-pipe, and lmII catback. My friend refered me to this guy who really only works on vettes and f-bodys but he would install everything for 400 bucks! so of course i jumped on it. 12 hours later he finally finishes so Im there with all of my fbody friends and were all thinking 300rwhp to 310rwhp, so we strap her up and let her rip. its insanely loud at wot. ( but very quiet at idle or low rpms ) well lets just say all there mouths dropped. Thanks slp :yeh: :hail1: put down 324rwhp and 337rwtq. thats a 44rwhp gain and 32rwtq. This is without a tune. Im not sure if a tune is going to help or hurt my numbers so if anyone can take a look at the dyno chart and explain it to me a bit better that would be great. He didnt have time to put in the 410's so there going in next week. Oh yeah the mechanic told me that this was by far the hardest job he has ever had putting in headers. and for now on hes will do it for no less than 650, thats with the x-pipe and catback installed too though.

At about 3700 you lean out to what appears to be above 14.0 to 1. You need a tune! That lean can hurt stuff in the long run. I would get a tune just for safety reasons, and any power gains are a plus. Just my .02.


All times are GMT -4. The time now is 05:43 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com