Re: Wholesale Pricing to M1R members!
PM sent
|
Re: Wholesale Pricing to M1R members!
I don't need anything, but I just wanted to publicly thank Steve for helping out his Mach brothers and sisters! I have taken advantage of Steve's offers and he has saved me some serious money. So....
Steve, once again, thank you for providing us this service and to those who are thinking about buying some Ford parts, PM Steve first and save yourself some money! Thanks man. Greg |
Re: Wholesale Pricing to M1R members!
No worries, it does take some time, but it's pretty cool,
finding out what some hotrodders here are up to. If I could just drive my Cobra........................ (long story) |
Re: Wholesale Pricing to M1R members!
NOTICE !!!!!!!!!!!
In an effort to improve ordering, shipping and making the entire process smoother and hopefully a whole lot easier and quicker, Joe has added an additional staff member at the shop in Georgia, mainly to take care of members here. :ANGEL: I am in contact with him several times every day. Joe did this at the request of members here and from myself. I am still here in SW Florida trying to help out, and I do listen and pass along your wants, needs and opinions, whether they are good or bad. I want to thank the members here for your patience. Thank you. Steve |
Re: Wholesale Pricing to M1R members!
Blown said it thanks a bunch for everything, great guy Steve
ASh |
Re: Wholesale Pricing to M1R members!
whats the current price on this here: http://www.fordracingparts.com/parts...tKeyField=2980
|
Re: Wholesale Pricing to M1R members!
Quote:
|
Re: Wholesale Pricing to M1R members!
Steve, I finally picked up my 4V timing kit. Man that is a nice kit!!!
Thanks for the money savings |
Re: Wholesale Pricing to M1R members!
I used one last month, it comes with EVERYTHING,
even timing cover gaskets, seal and bolts. It is pretty nice. |
Re: Wholesale Pricing to M1R members!
on the alum driveshaft that works for out stock 3650 when i get a built 3650, will the same driveshaft work? i know i have to change clutch and flywheel but didn't know on this, thanks
ASh |
Re: Wholesale Pricing to M1R members!
Quote:
no need to change the clutch. If you ARE changing to a 26 spline input shaft, FRPP has a clutch for that. M-7560-T46 "Kit contains 11" clutch disc with 26 spline hub and pressure plate. Clutch disc with carbon/copper lining on flywheel side and carbon lining on pressure plate side. Centrifugal assist design pressure plate with 25% more torque capacity then production Cobra. Used when installing M-7003-R58C and M-7003-R58H transmissions into 1996-04 4.6L Mustangs with production 11" flywheel or Ford Racing flywheels M-6375-F46, M-6375-G46 or M-6375-R00." http://www.fordracingparts.com/image...m-7560-t46.jpg |
Re: Wholesale Pricing to M1R members!
yes it would be changing, that is why clutch is going to have to change, that is why i'm asking if this driveshaft will work when i switch to a 26 i guess i should have said that, but right now i'm 10 and just will be switch to a 26 so didn't know if i would have to buy a whole new driveshaft
ASh |
Re: Wholesale Pricing to M1R members!
Quote:
Output shaft splines are the same. |
Re: Wholesale Pricing to M1R members!
so the one that you posted the alum driveshaft will work the one for around $290? i just don't want to waste money on one now when i can buy one later that is going to work. i'm looking at just a built 3650 i'm not switching to a T56
ASh |
Re: Wholesale Pricing to M1R members!
also did my order go threw???? didn't know if it got shipped out also
also another thing i need pricing on is the FRPP 31spline axle too ASh |
Re: Wholesale Pricing to M1R members!
Quote:
|
Re: Wholesale Pricing to M1R members!
Quote:
ASh |
Re: Wholesale Pricing to M1R members!
hey Steve i'll prob put in a order not this month but in two months on the driveshaft, right now i'm needing to build up my rear end, i've been wanting moser 31spline axle, but i would think the Ford Racing ones would work just as good. so could you please give me a price on the FRPP 31spline axle
also i think i asked but did my order go threw???? thanks can't wait to get that here ASh |
Re: Wholesale Pricing to M1R members!
Quote:
I posted it earlier in this thread Hard to keep track lately. http://www.mach1registry.org/forums/...&postcount=429 Your order was sent in last night, they should have gotten it this morning. |
Re: Wholesale Pricing to M1R members!
ok thanks, didn't get a email, its all good though, can't wait to get it,
did they get rid of the 10anv cobra shift boot yet? i think you said something that they were ASh |
Re: Wholesale Pricing to M1R members!
Quote:
Boot is still available, while quantities last. |
Re: Wholesale Pricing to M1R members!
this thread makes me wanna hoard parts and hold them for 10 years lol
|
Re: Wholesale Pricing to M1R members!
Quote:
Terminator fuel pumps, $1400.00 Yikes! |
Re: Wholesale Pricing to M1R members!
Quote:
ASh |
Re: Wholesale Pricing to M1R members!
hey steve just sent the money for the shift boot, thanks i kinda wanted to go ahead and get that bad boy before they run out of em in the future. thanks again Steve for the great money saving on parts, means a bunch
my dad also said thank you for the FRPP exhaust system for his powerstroke he order from you. ASh |
All times are GMT -4. The time now is 10:48 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com