need brake pad info!
i tried to change my pads and rotors today. the pads i have are raybestos part # PGD804C. they do not look at all like the ones i took off the car and i was not able to get them on the caliper. can anyone confirm that these pads fit? are they good, better or worse than the stock ones?
tks Rick911 |
Re: need brake pad info!
It is a common problem for auto parts stores to give you GT pads and not the Cobra pads we use.
Just checked advance autoparts and they even got it wrong. You have Mustang GT brake pads. Get your money back. I suggest you go on line and order Hawk HPS pads. Don't get the Bendix pads. They will make noise. http://stangsuspension.com/store/com...?idproduct=426 |
Re: need brake pad info!
the pad i have look like the 1st one in this link but is raybestos instead
|
Re: need brake pad info!
Yep, wrong pad.
http://stangsuspension.com/store/com...?idproduct=426 This listing shows a pcture of the correct pad: http://cgi.ebay.com/ebaymotors/HAWK-...0264QQtcZphoto |
Re: need brake pad info!
tks for confirming that. ill get them changed
|
Re: need brake pad info!
They need to give you PGD412M (metallics) or PGD412QS (ceramic)..
|
Re: need brake pad info!
just tell them you need pads for an 03 cobra...........dont bother with telling them its a mach.
|
All times are GMT -4. The time now is 01:31 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com