2003-04 Mach 1 Registry Owners Club - Car won't start after new fuel pump install

2003-04 Mach 1 Registry Owners Club (http://www.mach1registry.org/forums/index.php)

- Engine & Drivetrain (Including trans & rear axles) (http://www.mach1registry.org/forums/forumdisplay.php?f=64)

- - Car won't start after new fuel pump install (http://www.mach1registry.org/forums/showthread.php?t=136795)

tsracing

05-01-2019 12:23 AM

Car won't start after new fuel pump install

While back fix something with my nitrous and the car wouldn't start after the repairs. Installed new fuel pump today and still nothing. I tried the reset button, checked the fuses. I could be missing something Idk

DSG2003Mach1

05-01-2019 08:31 AM

Re: Car won't start after new fuel pump install

I would research the wires/pins for power going into and out of the fpdm. Have someone cycle the key and see if you get power at those points then go from there

311-420

05-01-2019 09:32 AM

Re: Car won't start after new fuel pump install

Quote:

Originally Posted by tsracing (Post 1634023)

While back fix something with my nitrous and the car wouldn't start after the repairs.

Then I'd start by going over what you 'fixed' and see where that leads.

HAEG	05-01-2019 02:18 PM

Re: Car won't start after new fuel pump install

Checking for power at the points is a good idea..
Maybe pinched or broke a wire during the install?
Maybe check the grounds too?

tsracing

05-02-2019 10:05 AM

Re: Car won't start after new fuel pump install

Good news got her running again. The inertia switch wasn’t plugged in for some reason. :confused:

ab_mach1

05-03-2019 12:31 PM

Re: Car won't start after new fuel pump install

Quote:

Originally Posted by tsracing (Post 1634035)

Good news got her running again. The inertia switch wasn’t plugged in for some reason. :confused:

Glad you got it working.

311-420

05-03-2019 04:55 PM

Re: Car won't start after new fuel pump install

Mach on

All times are GMT -4. The time now is 06:28 AM.