Re: 2018 Plans for your car.
Quote:
also with the fog lights - they sell ones with clear lenses that look like the head lights, Id highly recommend doing that for the upgrade. It looks better and more light |
Re: 2018 Plans for your car.
Have a long list, but this is going to take more then 1 year to complete. Hopefully the engine gets done by the end of summer.
Engine rebuilt Paint New carpet New seats New tint CD player Wheels maybe FR500's Short throw MGW New suspension Quote:
|
Re: 2018 Plans for your car.
Quote:
I then went to another shop and got a quote for the paint work plus repairing the crack in the bumper. They quoted me $800. So I let them do it. They did great work. Can't even tell it was ever painted. I'm going to source the hood decal myself from American Muscle and put that on this spring. I think I know the fog lights you are talking about. AM sells those too and I've been eyeballing them. |
Re: 2018 Plans for your car.
New headlights, windshield and hood sticker thing has had it.
|
Re: 2018 Plans for your car.
Plans for the Mach1 in 2018 -
Take it down the 1/4 mile. Get the paint redone. |
New wheels. https://uploads.tapatalk-cdn.com/201...4a8b31dbc8.jpg
Sent from my SM-G930V using Tapatalk |
Quote:
Nice! 18”? IG: @ab_mach1 |
Re: 2018 Plans for your car.
I had the hood and front bumper repainted in November to take care of rock chips from being driven daily. It pretty much just gets driven twice a week now. They removed hood and bumper and blended into the fenders. Cost was $2200.00 including replacing the hood stripes. Work was next to perfect. One of the employees used to work for 50Resto and they put a new front spoiler on at no charge for me.
Next to do this year are shocks / struts, complete brake job with new rotors, replace serpentine belt along with tuneup and fuel filter. In the fall I'll do oil change and coolant flush. I got a "hotwheels logo" badge (from a 2013 Camaro Special Edition) and I'm trying to decide where to put it. :crazy: |
Re: 2018 Plans for your car.
Since my build is complete, I need to adjust the new Flaming River steering linkage, install the new clutch cable and install new a/c lines. Most important, I need to drive it. Car has just a tick over 25,000 miles.
|
Re: 2018 Plans for your car.
Should replace hood decal...starting to show small bubbles along one edge, and have lower outside pad of driver seat recushioned, if that is possible.
|
Re: 2018 Plans for your car.
I have CAI, BAMA tune, ported and matched exhaust manifolds with full BBK exhaust. I am thinking maybe 96 Cobra intake cams would finish it off? Can't remember if those cams effect smog though. Guessing no since they are stock on Cobras.
|
Re: 2018 Plans for your car.
Removing the 14yr old tint for a clean look and 3M clear film. Installing Bassani X-pipe w/cats. Fix rear window defrost tab. Purchase Bilstien struts so I can finally lower the Mach. I’ve had Springs, rear shocks and CC plates in the garage for years now.
|
Re: 2018 Plans for your car.
Well its been a productive 2018 for our Mach already:
Since this is my WIFE's car, she says she just wants to replace the faded tint and we are done, lol |
Quote:
Sent from my SM-G930V using Tapatalk |
For anyone interested in these center cap 3d decals here's the link. https://3dcarstickers.com/en/auxpage_yourlogo/https://uploads.tapatalk-cdn.com/201...6ffb4ca380.jpg
Sent from my SM-G930V using Tapatalk |
Re: 2018 Plans for your car.
Got two quotes to repair my driver side seat "leather" which is actually vinyl I guess. First shop $250, second shop $360. The second shop gets the job because they work on classic cars all the time so they understand what I'm trying to accomplish, whereas the first shop does custom work for 'hood rides mostly to make things flashy.
So, hopefully the interior will be complete by the end of this month and then I just have some touch-up work to do on the exterior to get her ready for car shows. I'm also having trouble hitting 3rd gear at heavy throttle so I'm going to look into what causes this and try to make it better. |
Re: 2018 Plans for your car.
Quote:
had to get something done when i did and these were a few weeks out still when i got the fr5's. had someone waiting for my other wheels so i had to move... May upgrade to these next year or at next tire change...(which as most of you know is usually when i change wheels LOL.) |
Quote:
Sent from my SM-G930V using Tapatalk |
Re: 2018 Plans for your car.
Quote:
|
Re: 2018 Plans for your car.
Another item checked off the list today while the 4" of rain came down outside... https://farm1.staticflickr.com/798/2...fa2d5055_b.jpg https://farm1.staticflickr.com/875/4...b5a0d794_b.jpg also cleaned up my lugnuts by going black https://farm1.staticflickr.com/870/4...0755c0c0_b.jpg |
Re: 2018 Plans for your car.
Check off another mod...should be about done, but if I could just convince her to drop it a lil :secret:
from these: |
Re: 2018 Plans for your car.
I like the Cobra side scoop inserts! How was that and where did you find those?
Nice! |
Re: 2018 Plans for your car.
Quote:
1) take a tiny flat blade screwdriver and try to pry off where the lil push in clips are making sure not to chip/damage your paint... or the method I used 2) grab firmly and pull the entire scoop off :??:, its held on w/6 tiny nylon clips that are pretty tough, in fact, the scoop plastic mounts (6) will brake before the clips do, I had to re-glue two of my clip retainer mounts which was no biggie w/superglue. The good news if you do this method is, there is a plastic seal behind the scoop and in most cases it is not stuck on to the car any longer so you can clean it up and reseal it to the car, I used a lil rtv silicone since the original glue was contaminated with dirt/dust and resealed it to the car. Once you get the scoop off the inserts just push out from the back side. Where to get them: you can buy used cobra side scoops on ebay but you have to look for ones w/the terminator inserts or there is actually a guy also on ebay selling some of those NOS inserts at a NOS price too :devil: Not sure how many sets he has left as these are no longer made. Thanks to 2 members on this forum; 311-420 & ab_mach1 for the idea... |
Re: 2018 Plans for your car.
Things I've already done:
Install the RXT twin disk. JLT catch cans on both sides. Things to do: Install the fire suppression system. Install the new 5 point harness. (old one is out of date) Install Procharger Big-red blowoff valve. Install new front runners. (old ones are worn out.) Get her to the track and run in the 10's. |
Re: 2018 Plans for your car.
Keep it driving. Still running well after daily driven for so many years. Notice a bit of a burning smell while under a decent load so maybe my goal is to figure out the cause.
Oh, and probably a new AC compressor. |
All times are GMT -4. The time now is 08:24 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com