2003-04 Mach 1 Registry Owners Club

2003-04 Mach 1 Registry Owners Club (http://www.mach1registry.org/forums/index.php)

- Engine & Drivetrain (Including trans & rear axles) (http://www.mach1registry.org/forums/forumdisplay.php?f=64)

- - Flywheels (http://www.mach1registry.org/forums/showthread.php?t=136305)

Khyren

01-14-2018 10:19 AM

Flywheels

Are all modular engine flywheels a neutral balance? I know the older SBF's had a 28.8oz imbalance and the newer ones had a 50oz imbalance. I put a factory Cobra flywheel on my Mach when I did the T-56 install and just over 1k miles later, it's making all kinds of noises that sounds like it could be an exploded TOB to a main bearing.

01yellerCobra

01-14-2018 12:32 PM

Yes, they're all the same. What brand TOB and pilot bearing did you go with?

Misspelling brought to you by Tapatalk

Khyren

01-14-2018 02:32 PM

Re: Flywheels

I went with an FRPP tob and a national pilot bearing. The only other thing I can think could have done wrong was the guy that sold me the trans robbed the bellhousing to trans dowels and it is misaligned. I didn't check that as the bellhousing was tightly bolted to the trans.

All times are GMT -4. The time now is 05:20 PM.