Starting my Build
So I've been gathering parts for the past 6 months and now it's time to get things moving.
Parts I have so far: Used Mach block with crank Manley .020 over flat tops w/ rings 2013 Boss Rods ARP hardware 98 Cobra Cams A set of Ported C Heads (supposedly stage 2 livernois heads but can't confirm) Once I get my Billet oil pump I will be sending the block to the builder. |
Re: Starting my Build
1 Attachment(s)
Pic of a couple parts.
|
Re: Starting my Build
Drool... Looks sweet! whats the final goal for the car?
|
Re: Starting my Build
My goal is to have a mid or low 10 second street car.
It will be making around 450 at first. Then once I get a return style fuel system and bigger blower I will be expecting 600-650hp on E-85. |
Re: Starting my Build
good luck and have fun.
|
Re: Starting my Build
Thanks man. Can't wait to turn up the boost.
|
Re: Starting my Build
1 Attachment(s)
|
Re: Starting my Build
Quick update. Just ordered a MMR Hurricane oil pump. And tomorrow I plan on disassembling the rods and pistons from the used block. :yes:
|
Re: Starting my Build
Just bought an engine stand from Harbor Freight. Now time to mock up the old motor and remove the rods and pistons.
|
Re: Starting my Build
Sweet. Post pics as you go bro. Gonna have to up my game to keep up with you.
|
Re: Starting my Build
Every time I try and post a picture it says "You already uploaded this picture"????? I don't know whats going on with this thing!
Shakn, time for you to start building that mofo. I know you got a teskid block laying around.lol |
Re: Starting my Build
1 Attachment(s)
|
Re: Starting my Build
|
Re: Starting my Build
|
Re: Starting my Build
The crank has a little scar. Hopefully the machine shop can take care of it.
https://lh3.googleusercontent.com/-O...25285%2529.jpg |
Re: Starting my Build
|
Re: Starting my Build
1 Attachment(s)
Not to sure I you guys are going to be able to the pics.
Lets see if this works. |
Re: Starting my Build
Freakin government computer :grr:, I can't see any of the pics and I have been around since 11 PM, hopefully crank will clean up for you..great thread and good luck!!
Note: I could see the last one (thumbnail). |
Re: Starting my Build
Ok, thanks for the heads up. Now I know what works
|
Re: Starting my Build
I cannot see most of your pics, link to google mail is what happens. The attached ones has a broken link to the thumbnail but I can click on those and view them.
I put all my pics in Google+ under photos, then make the folder than I am sharing as 'public' but just that folder. Then I open the pics, right click and select 'copy image address' then I past this into the 'insert image' button/box. Like: https://lh4.googleusercontent.com/-M.../help+copy.jpg https://lh3.googleusercontent.com/-G...o/IMG_1188.JPG |
Re: Starting my Build
Thanks TKat. Think I got it figured out.
|
Re: Starting my Build
|
Re: Starting my Build
A word of advise :wall:...If you don't want to see the same damage to youre current crank again...Throw that MMR oil pump in the trash ,get a real pump get a melling pump.
|
Re: Starting my Build
you mean you have had a MMR pump fail on you....lol..:3:
|
Re: Starting my Build
Sort of..I went to install the MMR pump I got in a 2 for one deal. I decided to just check inside the pump to make sure it was clean. When I removed the cover a small sliver of metal was caught in gear and the housing. I called MMR and wanted them to replace it ,they said no , since I had opened it up! I called Melling , ordered a pump and threw the MMR in the round file !
|
Re: Starting my Build
Thanks for your input. Was the pump new when you opened it up? I've been doing some research and I've noticed people have had problems with both MMR and the melling pump. Seems like the TSS oil pump has had the best reviews.
|
Re: Starting my Build
Tomorrow im sending the valve covers to get powder coated azure blue. I was going to do the timing cover also but now I want to hyrdo dip it carbon fiber. not to sure yet.
https://lh5.googleusercontent.com/-3...ed+%288%29.jpg |
Re: Starting my Build
Well the azure blue the shop had didn't really match my car. The azure they had looked more like a grabber blue to me. I hope the color I picked matches up pretty good. My timing cover and my "Powered By Ford“ cop covers will be getting hydro dipped carbon fiber. My valve cover inserts will be getting dipped in carbon fiber too.
|
Re: Starting my Build
Quote:
|
Re: Starting my Build
It's a little to late for that now :wall:. I think it will come out fine. The valve covers should be ready by Friday.
|
Re: Starting my Build
Just dropped off the heads to the builder. We ended up going with 1mm oversize REV Intake valves and a 4 angle valve job. He said the ports on the heads were pretty good so no extra porting was needed.
|
Re: Starting my Build
Once the builder is done with the heads everything else will be on its way out my house.
https://lh6.googleusercontent.com/BR...w192-h108-p-no |
Re: Starting my Build
Saw these fuel pumps over at svt and ordered 2. Pretty awesome deal for anyone switching to e85.
http://www.ebay.com/itm/171058651115...84.m1423.l2649 fixed |
Re: Starting my Build
Quote:
|
Re: Starting my Build
Quote:
I have the same build going on sorta |
Re: Starting my Build
|
Re: Starting my Build
Since they have your heads. Not sure if you already have them or not but look into a better valve spring since your planning on running that much boost.
|
Re: Starting my Build
Good idea, i'll look into it. Supposedly the heads are stage 2 Livernois if thats true it should have Livernois single coil valve springs. Did you upgrade your springs? If so which did you go with?
|
I'd pay to have the heads looked at. A friend of mine trusted a used set of heads that ended up costing him a motor and eventually had to sell his car because of the added expense.
Sent with a shot of DROID go fast |
Re: Starting my Build
Quote:
|
Re: Starting my Build
[QUO TE =Mach828;1568135]I'd pay to have the heads looked at. A friend of mine trusted a used set of heads that ended up costing him a motor and eventually had to sell his car because of the added expense.
Sent with a shot of DROID go fast[/QUOTE] the heads are at the shop right now getting freshened up. when I showed him the heads I asked if he thought they're Livernois and he said there's a Good chance they could be. He really liked the ports and since they were used we went ahead and ordered oversize SS valves, did a 4 angle valve job, and new seals. |
Re: Starting my Build
Quote:
|
Re: Starting my Build
Quote:
Oh and I'm using comp springs.. yours are probably upgraded, I believe there stage 2 & 3 heads have their upgraded springs on them. |
Re: Starting my Build
Quote:
|
Re: Starting my Build
Just bought a Canton oil pan, windage tray, and gasket. I dont think i needed it but I paid $200 for everything. I thought it was worth it.
https://lh6.googleusercontent.com/VE...w192-h108-p-no |
Re: Starting my Build
Valve covers are here! They're not the perfect match but they look sweet. I also took a sneak peak at the carbon fiber timing cover and that thing looked awesome.
https://lh6.googleusercontent.com/AB...w192-h108-p-no |
Re: Starting my Build
WALBRO E85, flex racing high pressure F9000267 fuel pumps 450lph
https://lh5.googleusercontent.com/-I...-no/2013-12-19 |
Re: Starting my Build
Got my hydro dipped (carbon fiber) timing cover, COP covers, and valve cover inserts in. They look f****ng sweet.
|
Re: Starting my Build
Shoot me pics bro 512-738-3358
|
Re: Starting my Build
|
All times are GMT -4. The time now is 10:38 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com