Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

best 6 bucks I've spent on my car period. :ORANGE: HELPED a lot. Too bad the idiots at the stealership already f-ed up the stock boot... would be even quieter!

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

got my gasket thanks!!!!!!!

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

Still selling these?

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

Yes, I am. Here is the link to my website. http://stangshiftergaskets.com

Let me know if you have any other questions. Sorry for the delayed reply. I've been busy with changes to my business.

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

could I get just two base gaskets? thanx.

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

All of my sets are made up of a base gasket and two handle gaskets. You would have to buy two sets to get your two base gaskets. Hope this helps. I emailed you a reply as well.

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

I've got kind of strange question about the gasket, wonder if Bob or anyone else could answer this one for me. I installed my MGW shifter a little while ago. My buddy who had a spare MGW laying around from his old car, after driving mine suddenly remembered what he was missing. When we went to remove the shifter installed in his car (think it was a Pro 5.0) the previous owner of the car had used a CobraBob gasket but it looked like it wasn't put on the right way (TR-3650). If I'm correct the way the bolt holes are set up on the 3650 means that the gasket can only fit properly one way. So my question is should my friend purchase a new gasket because the original was mounted improperly or should the original be fine it looks to be perfectly normal other than the fact that it was on weird. Thanks for any advice you can give.

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

I'm really sorry I'm just now reading this message. I don't have as much time as I used to to browse the multitude of forums I'm active on. But to answer you question, it does sound like the previous owner didn't follow the installation instructions because the gasket definitely does install only one way. Hopefully he did order another set. Again, I apologize for the late response. I'll send you a PM as well.

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

Hey Bob - I just sent paypal for this...thanks! Looking for:

$7.00 - TR-3650 set

Thanks!
Steve

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

Just wanted to note that I'm still selling the shifter gasket sets. Thanks to all who have purchased sets in the past. I've now sold over 12,000 sets. :)
http://stangshiftergaskets.com/products.htm

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

Just a quick note of "thanks" for your past support of my shifter gasket sets. As I enter into my 6th year, I am humbled by the number of sales over that time and by how faithfully the Mustang community has spread the word and supported me. And this without my following the conventional marketing/advertising path due to my not having the funds to do so. Thanks again! :THUMBSUP:

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

Got my kit earlier this week to install with my tri-ax. Couldn't be happier. Thanks Bob!

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

Hi,

Are you still selling these gaskets. My mach shifter has started to make a little rattle over when the rpm's are over 3k. hopefully these can quiet it down.

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

Go to his website, hes still selling them.

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

Sorry for now replying sooner. Haven't checked this thread in awhile. Yes, I am definitely still selling my shifter gasket sets. I'm actually in the process of renovating my shop. Here is the link again. http://stangshiftergaskets.com

Thanks! :)

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

Finally finished the new shop. Moving the furniture and equipment in today. :)

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

Thanks for your continued business. And be sure to tell your Mustang friends how effective my shifter gasket sets are. :)

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

I PM'ed you. Ordered one a long time ago but need another one after removing and reinstalling the shifter a gazillion times. Just paypal $10 to the email address provided?

Thanks

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

just ordered one of these sets

hoping it will really quiet down the tranny whine!

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

how much for the set for a T-45, at least I hope that is what I have since it is supposed to be what I have. thanx.

ooppsss, never mind, found your site and ordered. for those reading, these are great. this is my 4th set for a vehicle.

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

I just ordered another set.

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

ordered a set today...

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

Same here :gears:

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

Me too!!

Re: F.S. - Shifter Gasket Set for '03/'04 Mach 1
 

I just installed the gasket set on the Steeda Tri-Ax shifter that came on my Mach 1. It did the trick. The shifter is actually very quiet now and the gaskets do not hinder the shifter in any way. It feels the same to me. I installed both Gaskets on the shifter handle as well. Great product Bob!!!