Re: New build
Looks good!
I need to get one of those work lights you’ve got |
Re: New build
Quote:
|
Re: New build
your main loop is fitting in very nicely! Love how tight it is.
Once it is tacked in, how do you weld the top of the bars? |
Re: New build
Quote:
|
Re: New build
Quote:
|
Re: New build
4 Attachment(s)
couple update pics...i welded my Merillat upper control arm mount in place solid. Leveled and came out good for a rookie welder.
Rear is Team z outlaw rear end shortened to 46". Once i add axles and brakes I will be a little over 51"...This (from my calculations) put me with a 15x12 rim with 4-4.5" backspacing. The rims should fit under the vehicle nicely. I will use a more concise measurement once I get to that point BUT for now...fitting everything up so see where I am at. Will need to powdercoat rear end after I tack in upper shock mount bar for the coilovers. If everything goes well I will mount upper mount and then rip that rear out and install Merillat lower control mounts shortly. |
Re: New build
Awesome Job going on here! :CHEERS:
|
Re: New build
5 Attachment(s)
shocks fitted...everything fits great...will pull down rear end and send to powder coat. replacing BOTH lower torque boxes...
ok...this isnt a hard thing to do BUT it is messy and time consuming...this will take care of the drivers side lower torque box that was starting to pull away from stock location. drivers side wheel tub fit into location as well... Roy cole has been helping with the cage so once we are done with that I will start tacking the tubs and seam sealing everything before paint... |
Re: New build
Awesome job and progress mags.
|
Re: New build
3 Attachment(s)
been slow on getting stuff done BUT a few update pics...HUGE thanks to Roy for his help
|
Re: New build
Awesome!!! Guessing Dynamat to finish it off??
|
Re: New build
Quote:
|
Re: New build
Quote:
I will epoxy finish all the interior flooring and UNDER the car. I plan on painting the entire inside floor/ underside with hammer coat black. |
Re: New build
5 Attachment(s)
couple more update pics....
|
Re: New build
4 Attachment(s)
i know it doesnt look like a lot.....but have gotten a bit done. thanks again to ROY for all his help....couldnt have gotten this far without his help for sure
|
Re: New build
Hell yeah! Thanks for the updated pics!
|
Re: New build
4 Attachment(s)
more pics..painted inside and re-shoot the engine bay....fitting doors back on with fenders and hood...then re-shoot the outside with fresh CX (dark shadow grey) paint....
|
Re: New build
what head gaskets did you use with the procharger set up? 20 psi 100 shot?
|
Re: New build
cometic....
|
Re: New build
Looking good! Are you on M1R on Facebook?
|
Re: New build
Quote:
|
Re: New build
Any updates on your build!
Fantastic job! |
All times are GMT -4. The time now is 12:23 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com