Re: The Wheel Pictures Thread
18x9 and 18x10 Forgestar F14's in piano black
http://i166.photobucket.com/albums/u...psr9kmn3sb.jpg http://i166.photobucket.com/albums/u...srs7c7wud.jpeg Ill have to post better pics. Ill be putting on Toyo R888's out back in a 305/35 and BFG Sport Comp 2's up front in 275/35 |
Re: The Wheel Pictures Thread
AFS 17/9 17/10.5 Rep 03 Cobras..Nitto 275/315 35 17
http://i687.photobucket.com/albums/v...6D830A2891.jpghttp://i687.photobucket.com/albums/v...F0C79616_1.png |
Re: The Wheel Pictures Thread
So, question. I am looking at getting 17 x 10.5 rims for rear and running a 315/35R 17 Nitto 555R. Will these fit under rear with no issues. Rear has stock springs, front has 1/2 coil cut and will keep my 275 upfront. Dont want to pull the trigger and then kave rubbing or have to roll fenders, thanks guys
|
Re: The Wheel Pictures Thread
[QUOTE=not a gt;1604454]So, question. I am looking at getting 17 x 10.5 rims for rear and running a 315/35R 17 Nitto 555R. Will these fit under rear with no issues. Rear has stock springs, front has 1/2 coil cut and will keep my 275 upfront. Dont want to pull the trigger and then kave rubbing or have to roll fenders, thanks guys[/Q
you will be fine, i had 315/35/17 NT05 and worked perfect |
Re: The Wheel Pictures Thread
[QUOTE=mr-proper;1604459]
Quote:
|
Re: The Wheel Pictures Thread
I cut 1-1/4 coil off on my car with 315's. A lot bigger drop than what you are doing, but I had to roll my fenders because they were cutting in to the tire. If you have any issues with that at all let me know. I have an eastwood fender roller I'll let you borrow.
|
Re: The Wheel Pictures Thread
Quote:
Thanks man, I may only cut 1/2 coil on rear like I did the fronts..you still owe me a meet up/cruise |
Re: The Wheel Pictures Thread
Quote:
|
Re: The Wheel Pictures Thread
1 Attachment(s)
18x8 TSW's. Gotta thank not a gt for getting me a killer deal sometime back:CHEERS:
|
Re: The Wheel Pictures Thread
Quote:
|
Re: The Wheel Pictures Thread
AFS rear 17X 10.5 perfect in my opinion
http://i1113.photobucket.com/albums/...psrhm15vst.jpghttp://i1113.photobucket.com/albums/...ps2ek59snc.jpg |
Re: The Wheel Pictures Thread
I have been looking at the 17 x 10.5 Mach 1 wheels for a while and want to purchase a pair with the grey inserts. Does anyone know where I could find a new pair? I use to look on eBay, but haven't seen them listed in some time. I also know AFSwheels use to sell them back in the day, but I haven't found a place recently that would have them in stock.
http://www.shop.afswheels.com/Mach-1...1.htm?page=all http://www.ebay.com/itm/AFS-fits-199...-/331204910746 |
Re: The Wheel Pictures Thread
Quote:
|
Re: The Wheel Pictures Thread
Ermergerd those Weld RTS, much want!!! Yes need to know BS on those that clear the brakes!
|
Re: The Wheel Pictures Thread
Quote:
|
Re: The Wheel Pictures Thread
its been a long time since I've posted. Here's how it sits now with 18x9 and 18x10's. 275/35 and 305/35
http://i166.photobucket.com/albums/u...psyib6deu5.jpg http://i166.photobucket.com/albums/u...psxgwixydm.jpg http://i166.photobucket.com/albums/u...ps6eftjckt.jpg http://i166.photobucket.com/albums/u...pseroj1u3q.jpg http://i166.photobucket.com/albums/u...psv8ayom08.jpg |
Quote:
They look great! |
Re: The Wheel Pictures Thread
Not a fan of black wheels, but I do think they look good on blue cars. That AB Mach is really sweet!
|
|
Re: The Wheel Pictures Thread
Ford Racing Bullitt Wheels
Front 17 x 9 w/ Falken Azenis FK452, 245/45 ZR17 Rear 17 x 10.5 w/ Mickey Thompson ET Street Drag Radials P315/35R17 http://i807.photobucket.com/albums/y...1/100_8757.jpg http://i807.photobucket.com/albums/y...1/100_8764.jpg |
Re: The Wheel Pictures Thread
1 Attachment(s)
Changed shoes
Decided to do all gloss black fr5's |
Re: The Wheel Pictures Thread
Quote:
|
Re: The Wheel Pictures Thread
1 Attachment(s)
Black with Polished lip Cobra R's
|
Re: The Wheel Pictures Thread
Looks good JB! I've liked all the wheel setups you've ran. Hopefully you kept the magnums to switch back and forth between! TR gives so many wheel color/style options that look awesome.:orange:
|
Re: The Wheel Pictures Thread
Thanks for the comment. I guess with all the choices i cannot help myself.
decided this time to go back to 18x9's because of all the problems i was having cutting into the 285's on the 10's in the rear. Decided i did not want to modify the quarter lip on a car that had only 2513 in my color in 2003. It was much easier just to swap to a 18x9...(gutless i know...but...) Actually, sold the magnums @ 3 years ago...we were in the process of designing a new one at the time (bad move on my part) but unfortunately that kinda fizzled out. Try to do something new every time its time for a new set of tires... |
Re: The Wheel Pictures Thread
2 Attachment(s)
Also added these with the new wheels...
|
Re: The Wheel Pictures Thread
1 Attachment(s)
New Wheels
|
Re: The Wheel Pictures Thread
Quote:
|
Re: The Wheel Pictures Thread
Quote:
|
Re: The Wheel Pictures Thread
4 Attachment(s)
Thanks to Mr. 311-420, I got me a sick set of wheels/tires!
17x9 - 275/40/17 Nitto 555 fronts 17x10.5 - 315/35/17 Nitto 555r rears |
Re: The Wheel Pictures Thread
They look great, Kyle! Glad these made it onto another nice Mach 1. Say goodbye to any traction problems you may have been experiencing. :thumbsup:
|
Re: The Wheel Pictures Thread
Quote:
|
Re: The Wheel Pictures Thread
Chrome Rovos Pretorias and Durbans 18x9 18x10.5. 225/35 fronts. 335/30 rears.
http://i1318.photobucket.com/albums/...ps9lul2xh9.jpg http://i1318.photobucket.com/albums/...pszbe8f8wh.jpg http://i1318.photobucket.com/albums/...psjfx22r38.jpg |
Re: The Wheel Pictures Thread
That looks awesome Sublime302. I like the touches of Cobra you got on the car as well. Any issues with the 335's rubbing in the rear?
|
Re: The Wheel Pictures Thread
Flush!
|
Re: The Wheel Pictures Thread
1 Attachment(s)
XXR 521 18x10 +25mm offset
|
Re: The Wheel Pictures Thread
Quote:
|
Re: The Wheel Pictures Thread
Quote:
|
Quote:
I agree, very sexy! IG: @ab_mach1 |
Re: The Wheel Pictures Thread
Dems purdy!
|
Re: The Wheel Pictures Thread
Staggered AFS 18" 9/10 on 245/40-18 and 285/35-18 https://farm5.staticflickr.com/4794/...635af100_h.jpg |
Re: The Wheel Pictures Thread
^ Looks good, now show the wife what it would look like lowered. :secret:
|
Re: The Wheel Pictures Thread
Quote:
Quote:
Quote:
|
Quote:
Quote:
You’re welcome. Perfect combo you have with your setup. https://uploads.tapatalk-cdn.com/201...2fd601cfa4.jpg IG: @ab_mach1 |
Re: The Wheel Pictures Thread
Killer shot! (nice lense you're using, I need a real camera). Love the terminator side scoop inserts. I was hoping I was the only one with a Mach who had done that. Looks like I'm in good company atleast.
Your fuel door looks awesome on there too. I just had an 01 Bullitt fuel door paint matched a couple weeks ago and I installed it last week with new stainless hardware. I'm still not sure if I'll keep it on there or not. But it did turn out nicely. |
Quote:
Thanks! I’d like to say I’m responsible for the Cobra side scoops and Mach fuel door, but both were from the previous owner lol. The do look better than the Mach scoop inserts. The Ox white and azure blue Mach’s are my favorite colors. They look so good with Mach trim. IG: @ab_mach1 |
Re: The Wheel Pictures Thread
Quote:
I used a tiny flathead screwdriver with the end wrapped by a microfiber towel. Start at the bottom of the insert and pry outwards. (You could cover the bottom corner of the scoop with painters tape too if you're worried). Once youve got the first tab free, you can put the screwdriver down and use just your fingers for the remaining tabs. Only 3 or 4 total, cant quite remember. The new inserts will just press in. No need to remove the scoop. |
SVE staggered s350 wheelshttps://uploads.tapatalk-cdn.com/201...7efbb8a9a2.jpghttps://uploads.tapatalk-cdn.com/201...1b875fa1e3.jpg
Sent from my SM-G930V using Tapatalk |
Quote:
They look good! Pictures really can’t capture black and other darker wheels. Well, maybe a pro photographer could lol. Are your calipers new or did you paint them? IG: @ab_mach1 |
Re: The Wheel Pictures Thread
Removed those chrome lugs, much better https://farm1.staticflickr.com/899/3...1e99f3bf_b.jpg |
All times are GMT -4. The time now is 10:14 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com