Re: Eaton Swap.....
2 Attachment(s)
i started tonight! heres my 1st night progress!
http://www.mach1registry.org/forums/...3&d=1195285018 http://www.mach1registry.org/forums/...4&d=1195285018 |
Re: Eaton Swap.....
5 Attachment(s)
I will try and go back later and label exactly what everything is.
1. Upper alternator bracket (10A313) Part #: 2R3Z-10A313-AB List price: $172.64 Cost: $77.69 2. Lower alternator bracket (10153) Part #: 2R3Z-10153-BA List Price: $54.09 Cost: $24.34 3. Lower pulley or crankshaft pulley (6312) Part #: 2R3Z-6312-BA List price: $801.67 Cost: $481.00 4. Alternator (10346) Part #: 2R3Z-10346-BA List: $293.52 Cost: $176.11 5. Coolant crossover (8548) Part #: 2R3Z-8548-AA List price: $135.80 Cost: $61.11 |
Re: Eaton Swap.....
5 Attachment(s)
Some more parts.
6. Egr (9D475) Part #: XW4Z-9D475-AB List price: $107.09 Cost: $48.19 egr tube(9D477) Part #: 2R3Z-9D477-AD List price: $62.32 Cost: $37.39 w/ hoses(9P761A & 9P761B) that go to the sensor 7. Coolant Hose (8A593) Part #: 2R3Z-8A593-AB List: $40.87 Cost: $18.39 8. Pulley bridge w/ idlers and tensioner (6B209B) Part #: 2R3Z-6B209-BC List: $382.55 Cost: $229.53 9. I/C pump(8501) Part #: F8YZ-8501-AA List: $403.70 Cost: $201.85 bracket(8N500) Part #: 2R3Z-8N500-AC List: $86.50 Cost: $51.90 w/ hose (9L443C) Part #: 2R3Z-9L443-CA List: $22.16 Cost: $9.97 10. Pulley (8678A) Part #: 2R3Z-8678-BA List: $133.47 Cost: $80.08 |
Re: Eaton Swap.....
5 Attachment(s)
Some more..............
11. Coolant hose 12. Heat exchanger lines and hose Part #: 2R3Z-9N491-CA List: $84.77 Cost: $50.86 (9H08 in Ford catalog pic) 13. Intake tube Part #: 2R3Z-B659-BA List:$90.80 Cost: $54.48 14. PCV tubing. One side plugs into the back of the s/c and the other side connects to a tube that goes into the drivers side head. 15. Cobra crank pulley(6312) |
Re: Eaton Swap.....
5 Attachment(s)
Some more parts
16. i/c hose that goes from hard line to hard line. (9L443C) 17. Bracket (9J432), w/ (9H465), w/ (9J459), w/ (9J460) 18. I/c resevoir (8A080B) w/ hose (9L443A) 19. Cobra oil cooler adapter (6881) (Not seen, but attached to the backside of the cooler Cobra Oil cooler (6A642) 20. Crank pulley /Harmonic Balancer (6312) & Tensioner on timing cover (6B209A) & Timing cover (6D080) |
Re: Eaton Swap.....
5 Attachment(s)
More parts....
21. Heat exchanger tubing (9H308) Part #: 2R3Z-9N491-CA List: $84.77 Cost: $50.86 with soft lines. 1 goes to the i/c resevoir and the other goes to the intake to i/c adapter (9L443B). 22. heat exchanger (8K226) Part #: 2R3Z-8K226-AA List: $760.63 Cost: $456.38 23. Plenum (9A589) Part #: 2R3Z-9A589-CA List: $517.82 Cost: $258.91 Iac (9F715) Part #: 2R3Z-9F715-AB List: $84.70 Cost: $42.35 T/B (9E926) Part #: 2R3Z-9E926-AAA List: $236.74 Cost: $118.37 24. Heat exchanger tubing (9N491A) Part #: 2R3Z-9N491-DA List: $98.15 Cost: $58.89 w/ soft lines (9L443F) Part #: 2R3Z-9L443-FA List: $15.02 Cost: $6.76 (9L443G) Part #: 2R3Z-9L443-GA List: $15.02 Cost: $6.76 25. Heat exchanger brackets (8A193) Part #: 2R3Z-8A193-AA List: $207.48 Cost: $124.49. One side of them. Im missing the other 2 but will have them shortly. |
Re: Eaton Swap.....
5 Attachment(s)
Some more.
26. Lower intake to intercooler adapter. (9N491B) 27. Timing cover gaskets(6020) 28. Plenum to s/c gasket(9L437) 29. S/C to lower intake gasket(9H486) 30. Harmonic balancer bolt(6A340) & washer(6378) |
Re: Eaton Swap.....
1 Attachment(s)
More...
|
Re: Eaton Swap.....
ph8
|
Re: Eaton Swap.....
Ph9
|
Re: Eaton Swap.....
What's the PH7 PH8 PH9 on those last few posts?
|
Re: Eaton Swap.....
Quote:
Place holders for more pics. My puter at home is not picking up internet so I have not been able to post them. I will shortly though. |
Re: Eaton Swap.....
thx allot for doing this guys this will help out big time when i start bolting parts on! :worship:
|
Re: Eaton Swap.....
Quote:
|
Re: Eaton Swap.....
i took a lil mock up shot wit the eaton... looks BA.
http://img408.imageshack.us/img408/1454/1004821xv7.jpg |
Re: Eaton Swap.....
Oh snap!! NICE!! Mm mm lookin' good. :33:
|
Re: Eaton Swap.....
I think it would look hella cool if the blower was tall enough to poke out of our hoods like the shaker does,
|
Re: Eaton Swap.....
2 Attachment(s)
|
Re: Eaton Swap.....
Jeff,
In pic 15 that I posted on this page that tubing comes out from underneath the lower intake. Can you tell me where those two go so I can label it. |
Re: Eaton Swap.....
1 Attachment(s)
http://www.mach1registry.org/forums/...1&d=1195673873
That look right? |
Re: Eaton Swap.....
Neither one of those look like it.
Here's a pic of where it mounts. http://img134.imageshack.us/img134/7...swap034gm4.jpg |
Re: Eaton Swap.....
Quote:
|
Re: Eaton Swap.....
Awesome progress pics
|
Re: Eaton Swap.....
Quote:
|
Re: Eaton Swap.....
2 Attachment(s)
That probably sounds about right. You may be able to fab up the hose itself.. This is the only EGR/PCV stuff I can find for the Cobra
http://www.mach1registry.org/forums/...1&d=1195677812 http://www.mach1registry.org/forums/...1&d=1195677812 |
All times are GMT -4. The time now is 01:01 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com