Re: Sticky Suspension Thread
 

Suspension mods:
2003 Cobra IRS swap
Custom DSS Level 5 half shafts with stock hubs
Complete Full Tilt Boogie racing IRS bushing kit (less rear differential mount)
Maxiumum Motorsports Solid rear differential mount
Steeda front bump steer kit
Steeda solid front sway bar mounts
Eibach front sway bar
Eibach rear sway bar
Maximum Motorsports Sport series coil overs on all 4 corners (400/600 hypercoil springs)
Maximum Motorsports Cast Camber plates
Maximum Motorsports A arms
Maximum Motorsports solid steering rack mounts
Steeda full length subframe connectors
Kenny Brown Extreme Matrix Bracing and jacking rails

http://i195.photobucket.com/albums/z...36957971-O.jpg

http://i195.photobucket.com/albums/z...49778602-O.jpg

Re: Sticky Suspension Thread
 

SR Lowering Springs
Stock Isos
Stock Wheels
Stock Suspension

https://lh3.googleusercontent.com/uF...=w1152-h864-no


https://lh3.googleusercontent.com/oW...=w1152-h864-no

Plan to install J&M CC plates to help toe in wear.. shouldn't change the stance though

Re: Sticky Suspension Thread
 

H&r springs
eibach pro dampers
j&m lower control arm
bbk cc plates


soon will have eibach anti-sway bars
strut tower braces

Re: Sticky Suspension Thread
 

Hey guys I have a 03 Mach and I'm wanting to do the upr
k member with tubular a arms bumpsteer kit and coil overs.kinda need some direction on what coil overs and struts. From what I've read 12-250 on coils is what I might like for ride height.. I'm wantin to just do h&r springs in the back.. basically I want the ride height if eibach sport line with coil overs out front instead.. anyone who has this set up and can give me a good list of what parts to get to achieve this would be my hero lol .. money isn't really a issue but I wanna stay reasonable. Also I plan on running fr 500 18x10 18x9 staggered with nt05 drags in the back 305,35/18 unless I can squeez a 315 out back? and 555's in the front 265/35/18 just thought I'd add that Incase of fitment issues.. car will see about 3,000 miles a year 95% street thanks gents

Re: Sticky Suspension Thread
 

Start with MM stuff rather than UPR.