Re: Eaton Swap.....
Quote:
|
Re: Eaton Swap.....
In an effort to add pertinent information to the thread I think that it would be valuable to post the specific part numbers.
Additionally as other people may have a similar question this would reduce the redundant PMs to machgsxr & lookngo. |
Re: Eaton Swap.....
Quote:
|
Re: Eaton Swap.....
Quote:
|
Re: Eaton Swap.....
Quote:
|
Re: Eaton Swap.....
xw4z9d475ab - EGR valve
2r3z9d477ad - EGR tube (9J432) Bracket for vacuum stuff on left side of the S/C (9H465) Vacuum stuff (9J459) Vacuum stuff (9J460) Vacuum stuff (9E498) Hose's or tube cluster of connectors for the vacuum parts above e6az9d476b - EGR gasket You can delete all these off for an egr delete. I don't know the correct names for the vacuum parts, but it can all be thrown in the trash. You will just need some vacuum hose to make a connection and get rid of all the cluster. You can pick it up at Auto Zone for like 5 bux. |
Re: Eaton Swap.....
Might still want to pick up the gasket so you can make a blockoff for the back of the eaton or pick up one of the blockoff kits (I think they come with a gasket).
|
Re: Eaton Swap.....
Quote:
|
Re: Eaton Swap.....
machgsxr i was hopin you would chime in. thanks
|
Re: Eaton Swap.....
Quote:
|
Re: Eaton Swap.....
Quote:
|
Re: Eaton Swap.....
Quote:
|
Re: Eaton Swap.....
Hey what are you guys doing for that plug in the lower intake? Just plug it off? Im also doing EGR delete if that matters for this plug? And dont know so i will ask, will this affect my whipple plans in the future or do those come with new lowerS?
|
Re: Eaton Swap.....
Quote:
|
Re: Eaton Swap.....
anyone?
|
Re: Eaton Swap.....
Quote:
EGR would not matter for that plug. 2 seperate deals. Neither will affect your plans for the whipple and the whipple uses the same lower that you are using now. |
Re: Eaton Swap.....
Ok thanks gsxr, did you use just regular tubing and make it yourself with a 90' fitting? or what did you use?
and another quicky, does the intercooler bolt to anything or does it just sit in the lower?? Surely it mounts somehow? |
Re: Eaton Swap.....
Intercooler bolts to the bottom of the Eaton.
|
Re: Eaton Swap.....
uh oh.. i just got 99% of the parts :claus: for $500 too! LOL all i know how is the actual Eaton LOL :smack:
|
Re: Eaton Swap.....
so is there any ill effects of me blocking off that lower intake hole? If not, what should i do with the pcv at that point...thanks? Doin in the first weekend of may!!
|
Re: Eaton Swap.....
Quote:
|
Re: Eaton Swap.....
does anyone have any templates, blue prints or spare brackets they can use to give me measurements for the shaker brackets?? its really hard to get an exact measurement from the pics here.
|
Re: Eaton Swap.....
Well, ive got everything, ill be doing the swap next weekend so ill keep it updated!! I will try to make a thread but im usually not good about updating lol.
|
Re: Eaton Swap.....
And how much boost is a 3.1 pulley?
|
Re: Eaton Swap.....
Quote:
Also a 3.10 pulley would make 11-12pounds of boost. I make 9-10 with long tubes and a catless-x. |
All times are GMT -4. The time now is 09:51 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(c) 2002-2013 Mach1Registry.com