2003-04 Mach 1 Registry Owners Club - Official Whipple/KB/Eaton HP/TQ/mods thread:

Page 10 of 10

Show 50 post(s) from this thread on one page

2003-04 Mach 1 Registry Owners Club (http://www.mach1registry.org/forums/index.php)

- Power Adders (http://www.mach1registry.org/forums/forumdisplay.php?f=76)

- - Official Whipple/KB/Eaton HP/TQ/mods thread: (http://www.mach1registry.org/forums/showthread.php?t=78452)

311-420

08-21-2018 07:16 AM

Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Quote:

Originally Posted by hotford (Post 1632323)

maybe go to a 6 lb lower with a larger blower pulley to help that belt from slipping, heck any belt you use making 29 psi is gonna have a hard time holding it with a 2.75, bigger pulley on the blower would help.
BTW whats your IAT at with that base compression and that boost level.

Arent aftermarket uncaged lowers considered a no-no with a blower that size?

fastlane

08-22-2018 04:29 PM

Re: Official Whipple/KB/Eaton HP/TQ/mods thread:

Yeah, aftermarket pulleys with this blower are a no go. It puts way too much stress on the crank snout.

As far as IATs, I didn't get any data log as I didn't do the tune. The tuner wasn't concerned with whatever he was seeing and I trust his tunes. He has always alerted me to any issues including high IATs on past tunes. When I finally get the car out for a good rip, I will data log and see what they look like.

This may be a short endeavor as I really want to go turbo now. Losing 100+ whp to turn the blower is disheartening.

All times are GMT -4. The time now is 12:50 AM.

Page 10 of 10

Show 50 post(s) from this thread on one page