Hey what say you? Will these fit my rims cause they fit my price range.

[Nor Cal Mach]

My current Falcon Azenus rub like a mo fo cause the sidewall is 40 so it jumps under when I hit a bump. My rear rims are 18x10s, will these 315s work cause 305s cost uckFin more. I dont want my car to shread my tires and im not rollin the fenders cause others have gotten away from doin so. I want to get some new rears and these are cheap enough to get. Let me know

http://www.tirerack.com/tires/tires.jsp?tireMake=Pirelli&tireModel=PZero+Corsa+System&partnum=13ZR80CRN6&vehicleSearch=false&fromCompare1=yes

[Nor Cal Mach]

Like you said its not like that

[Chances50]

Like you said its not like that

You realize tires are measured Width/Height/Rim right?

I dont thing id go wider if its rubbing.

[Nor Cal Mach]

You realize tires are measured Width/Height/Rim right?

I dont thing id go wider if its rubbing.

Wouldnt my tires now only be rubbing cause there too tall. They are 40 series so if I get 30s or 35s I should be good right? Thats why im asking before i uckF up and by em

[Nor Cal Mach]

Also to throw in there my tires only rub if I hit a bump super hard. Not all the time ya know like driving normal or whatever they wont rub. It only happens when I hit a bump

[2k4mach]

you know the pzero corsas are not full tread tires right? there only 6/32's opposed to 10/32 most street tires are and they are of a softer compound so they will wear faster as well.

[Nor Cal Mach]

you know the pzero corsas are not full tread tires right? there only 6/32's opposed to 10/32 most street tires are and they are of a softer compound so they will wear faster as well.

Aww man well thanks for tellin me. Im deff not gonna buy em then. Anyone got any recomendations on some decently wide tires at a super good deal? I wouldnt mind something wider then what I have now but I wont go any skinier.

[RollTideMach]

The height of the side wall depends on the width of the tread. A 315/35r18 is going to have a taller sidewall then a 305/35r18 because the number following the / is a percentage of the tires width. Just keep that in mind when your looking.

[1fast03mach]

Check out the Nitto NT05 they have a 295/35 i have no rubbing issues at all and i run 295/35 on a 18X10 wheel.

[Nor Cal Mach]

The height of the side wall depends on the width of the tread. A 315/35r18 is going to have a taller sidewall then a 305/35r18 because the number following the / is a percentage of the tires width. Just keep that in mind when your looking.

So with that in mind would these tires fit???

[Nor Cal Mach]

Check out the Nitto NT05 they have a 295/35 i have no rubbing issues at all and i run 295/35 on a 18X10 wheel.

Were did you get yours from?? Are these tires a good deal or what?

[2k4mach]

Check out the Nitto NT05 they have a 295/35 i have no rubbing issues at all and i run 295/35 on a 18X10 wheel.

seeing how theres only 1 tire avaliable in a 315/30 hes really forced to go to a 315/30..........

[Nor Cal Mach]

seeing how theres only 1 tire avaliable in a 315/30 hes really forced to go to a 315/30..........

I'm so lost with your post. Can you clarify