FS 04 mach, SC, forged, screaming yw, auto

[nastyNYmach]

Im moving and need the money. Ive owned this car for a year and the previous owner had all the work done at Laroccas in Englishtown NJ when the car had 7500 miles, now has 10,190.

ENGINE+ SC
-DSS super mod level10 iron shortblock
-innovaters west lower pulley
-stock heads, cams, upper and lower intake
-polished D-1SC procharger, 3core intercooler
-488/435 rwhp

FUEL SYSTEM
-50lbs injectors
-aeromotive fuel rails+regulator
-complete rubber lines+AN fittings
-weldon external fuel pump
-aeromotive 16302 fuel pump controller
-BBK throttle body
-pro m mass air meter
-autologic chip

EXHAUST
-BBK ceramic LTs
-BBK x pipe, no cats
-dynomax mufflers welded to stock tail pipes

DRIVETRAIN
-tranny built by local AAMCO at 8,276 miles
-thermal dynamics cooler
-pro torque converter
-4;10 gears

MISC.
-slp line lock
-auto meter vacum/boost and fuel press. gauges
-msd tach driver

Stock rims and tires, ice cold ac, hot heat, everything works, needs nothing, always garage kept. Runs very well, tranny shifts awesome, chirps 3rd!! NEVER RACED!! few small scuffs could use a wax job. I have nearly all recipts. The car could easily make another 100hp with pulley swap and new tune.

$22,000 obo
would consider trade for import 4cylinder pickup truck
Pics in a few days
Thanks,Derek

[Thor]

Englishtown and you weren't tempted to roll on over to Raceway Park? Not even ONE run?

[blachatch]

D1SC or D1?

[nastyNYmach]

D1SC or D1?

polished D1SC

[nastyNYmach]

Price Drop $$ 21,000 motivated seller!! I have pics ready to be emailed

[blachatch]

Pics to jospd86@hotmail.com

[nastyNYmach]

pics sent

[one mach 1]

Im moving and need the money. Ive owned this car for a year and the previous owner had all the work done at Laroccas in Englishtown NJ when the car had 7500 miles, now has 10,400.

ENGINE+ SC
-DSS super mod level10 iron shortblock
-innovaters west lower pulley
-stock heads, cams, upper and lower intake
-polished D-1SC procharger, 3core intercooler
-488/435 rwhp

FUEL SYSTEM
-50lbs injectors
-aeromotive fuel rails+regulator
-complete rubber lines+AN fittings
-weldon external fuel pump
-aeromotive 16302 fuel pump controller
-BBK throttle body
-pro m mass air meter
-autologic chip

EXHAUST
-BBK ceramic LTs
-BBK x pipe, no cats
-dynomax mufflers welded to stock tail pipes

DRIVETRAIN
-tranny built by local AAMCO at 8,276 miles
-thermal dynamics cooler
-pro torque converter
-4;10 gears

MISC.
-slp line lock
-auto meter vacum/boost and fuel press. gauges
-msd tach driver

Stock rims and tires, ice cold ac, hot heat, everything works, needs nothing, always garage kept. Runs very well, tranny shifts awesome, chirps 3rd!! NEVER RACED!! few small scuffs could use a wax job. I have nearly all recipts. The car could easily make another 100hp with pulley swap and new tune.

$22,000 obo
would consider trade for import 4cylinder pickup truck
Pics in a few days
Thanks,Derek
Are you planning on putting a Jet engine in the back of that 4 cylinder pick up truck?

[blachatch]

How much boost right now? Is there any belt slip?

[nastyNYmach]

I just need somthing to move some furniture thats good on gas.

[nastyNYmach]

How much boost right now? Is there any belt slip?

I was told 12lbs but i think it makes 15. Havent really used the car since last fall. 3.40 sc pulley, 7.25 lower. Running 6rib belt on 8rib innovators west lower, dayco tensioner. Zero belt slip, pulls long and hard.

[one mach 1]

I just need somthing to move some furniture thats good on gas.
Got ya. Sucks that you have to sell.

[nastyNYmach]

Basically, if i made more money i would never sell it.
Car actually has 10,190 miles on odometer

[BlueDevil04]

I was told 12lbs but i think it makes 15. Havent really used the car since last fall. 3.40 sc pulley, 7.25 lower. Running 6rib belt on 8rib innovators west lower, dayco tensioner. Zero belt slip, pulls long and hard.

That does not sound right. I am running a 3.55 pulley and an oversized crank pulley ( i think its 7.25 if thats the oversized) and my car is making 17psi at 6200 rpms. I even have cams which should make less boost due to the airflow efficiency.

[BlueDevil04]

Now that i think about it mine is 7.5", but i didnt know that .25" would make that big of a difference.

[nastyNYmach]

sold