Dyno the mach today!! ( eaton swap)

[No1Ford]

It's only seeing 7LB of boost and 17 degrees of timing. Heres the graph.http://i235.photobucket.com/albums/ee304/HITECHCHRIS/utechwhoohoo.jpg

[beerformeplz]

Why only 7 pounds?

[No1Ford]

Why only 7 pounds?

I just got the 3.1 pulley today in the mail.The car still up at the shop having gauges put in it.

[2002BLGT]

I just got the 3.1 pulley today in the mail.The car still up at the shop having gauges put in it.

if you up the boost pull back the timing to 15-16 if you are on stock internals

[lxh89]

Nice numbers!

[TR04MACH]

Nice numbers, any other mods done to it?

[got03mach1]

Man i gotta go with an eaton swap. Just cant find the right price for a complete kit though.

[wutang61]

7lbs seems low for the 3.65 pulley. you should be seeing around 8-9. you double check your BBV?

but you made awesome numbers. congrats man!

[No1Ford]

7lbs seems low for the 3.65 pulley. you should be seeing around 8-9. you double check your BBV?

but you made awesome numbers. congrats man!

It has SLP LT 1"3/4 and a catless X, so thats probably why the boost is lower.

[wutang61]

oh alright. then that explains the boost loss. headers usaully take a pound or 2 off.

[No1Ford]

oh alright. then that explains the boost loss. headers usaully take a pound or 2 off.

I see your doing the swap, are you done yet?

[Iceman]

nice #"S

[wutang61]

I see your doing the swap, are you done yet?

waiting on parts. :anger:

should be done within the next few weeks

[No1Ford]

What parts are you waiting on?

[nasty04mach1]

We need a VIDEO!!! Thats great man. Congrats on the good numbers with such low boast. Im jealous : (

[No1Ford]

We need a VIDEO!!! Thats great man. Congrats on the good numbers with such low boast. Im jealous : (

Thanks, That the old one.
I put the 3.1 pulley on there and up it to 467rwhp and 433rwtq and 9LBS of boost.
She pull like a mofo now!!:)

[nasty04mach1]

Thanks, That the old one.
I put the 3.1 pulley on there and up it to 467rwhp and 433rwtq and 9LBS of boost.
She pull like a mofo now!!:)

I really want one for my car. I want to p/p the blower. Was it a hard install? I love the way sound!!!

[machgsxr]

I ran into my dyno vid last night after finding my camcorder. Sounded good.

[No1Ford]

I ran into my dyno vid last night after finding my camcorder. Sounded good.

Lets hear it!!
I'll have to do one this weekend ,I'm going on a cruise with a local club this weekend. Plan on taking down some cobras!!:smokin:

[corysmach1]

Awsome numbers...I would love to see some vids inside the car and outside the car I love the whine!!!

[No1Ford]

Awsome numbers...I would love to see some vids inside the car and outside the car I love the whine!!!

With the stock pulley there was zero whine to be heared!:eyes:
Pretty much why I put the 3.1 on there.

[cre8787]

How much boost do you recommend for stock bottem end? Do you think 10lbs will be okay or should I stick to 8lbs? I really dont want to push her past 450 hp.

[No1Ford]

How much boost do you recommend for stock bottem end? Do you think 10lbs will be okay or should I stick to 8lbs? I really dont want to push her past 450 hp.

From everthing I've readed it's the timing that kills the stock bottom end.
So 10LBS and under should be ok.

[nickster]

what is everybody running on the bottom pulley i have a metco 6# and a stock pulley on the blower,also using the big oval tb with plenum,+ what is every using for injectors and pumps

[TR04MACH]

what is everybody running on the bottom pulley i have a metco 6# and a stock pulley on the blower,also using the big oval tb with plenum,+ what is every using for injectors and pumps

You'll want to probably run a stock lower unless you build the block. A six pound lower is going to put you in a pretty unsafe place on the stock block.

[nickster]

its not stock ,all forged but have flattops,going to be running my stag 2 cams aswell,may put the 4# ring if power is to much

[corysmach1]

With the stock pulley there was zero whine to be heared!:eyes:
Pretty much why I put the 3.1 on there.

Do you have a CAI? If not do a JLT CAI and you will definately be able to hear it whine.

[No1Ford]

Heres the car at the track!!!

http://videos.streetfire.net/video/Mach_159912.htm

[mach1coastie]

Sweet ride man. I just can't bring myself to power adders even with everyone at work ridin me to supercharge it.