Mach1Phreak
01-16-2005, 06:37 PM
2003 Mach 1 with 6000 miles.
Here are the specs:
Engine MOD 4.6L DOHC V8
Displacement 4.6L, 281 cu. in.
Horsepower @ rpm 305 @ 6000
Torque lb.-ft. @ rpm 320 @ 4250
Compression Ratio 10.1:1
Fuel System Sequential multi-port electronic fuel injection
Fuel Requirement Premium (91 octane minimum)
Exhaust System Stainless steel with chromed rolled tips
Transmission Type 5-speed manual
Final Drive Ratio 3.55:1
Gear Ratios (Manual) 1st - 3.38; 2nd - 2.00; 3rd - 1.32; 4th - 1.00; 5th - 0.62; Rev. - 3.38
Chassis Construction Unitized body
Front Suspension Independent, modified MacPherson strut with Separate spring on lower arm and stabilizer bar
Springs 600 lb Helical coil, rubber-insulated, unique linear rate
Shock Absorbers Integral with Tokico strut, gas-pressurized, Hydraulic, unique valving
Stabilizer Bar 26.5 mm (1.04 in.) solid
Rear Suspension Four-bar link with coil springs on lower arm, unique horizontal axle damper and stabilizer bar
Springs 250 lb Helical coil, rubber-insulated; unique linear rate
Shock Absorbers Unique axle damper, gas-pressurized, hydraulic. Vertical Tokico shock absorbers with horizontal axle dampers, unique valving
Stabilizer Bar 23 mm solid (.905 in.) solid
Steering Power-assisted rack-and-pinion
Overall Ratio 15.3:1 on center
Turning Diameter, Curb-to-Curb 38.1 ft.
Brakes Front Calipers Aluminum dual piston, custom anodised painted
Rotors 330 mm (13 in.) Brembo vented
Rear Calipers Single piston
Rotors 296 mm (11.7 in.) Brembo vented
ABS/Traction Control Yes
Pedals Stainless steel pedal covers are positioned to provide better heel-to-toe relationship
Wheels 17 x 8-inch Magnum 500-style "Heritage Style" (5 spoke)
Tires Goodyear 245/45ZR17 Eagle ZR45
Dimensions:
Wheelbase 257.3 cm (101.3 in.)
Overall Length 465.3 cm (183.2 in.)
Overall Height 132.9 cm (52.35 in.)
Overall Width 185.6 cm (73.1 in.)
Tread Width (Front/Rear) 152.9 cm (60.2 in.)/153.9 cm (60.6 in.)
Curb Weight 3465 lbs.
Front/Rear Seating Capacity 4
Aerodynamics Coefficient of Drag (Cd) 0.36
Luggage Capacity 10.9 cu. ft.
Passenger Volume 83.0 cu. ft.
Total Interior Volume 93.9 cu. ft.
Fuel Tank Capacity 15.7 gal.
I have also added a JLT CAI and Pro 5.0 shifter. The rest is stock. I have all the origional parts to pass California smog.
There is nothing wrong with it and it is one hell of a fun car. I just need the money for a new project.
Price: $ 23,500.00
You can contact me at jkwaters@sonic.net
http://www.sonic.net/jkwaters/2003Mach1/m1.jpg
http://www.sonic.net/jkwaters/2003Mach1/m2.jpg
http://www.sonic.net/jkwaters/2003Mach1/m3.jpg
http://www.sonic.net/jkwaters/2003Mach1/m4.jpg
http://www.sonic.net/jkwaters/2003Mach1/m5.jpg
http://www.sonic.net/jkwaters/2003Mach1/m6.jpg
http://www.sonic.net/jkwaters/2003Mach1/m7.jpg
http://www.sonic.net/jkwaters/2003Mach1/m8.jpg
http://www.sonic.net/jkwaters/2003Mach1/m9.jpg
Here are the specs:
Engine MOD 4.6L DOHC V8
Displacement 4.6L, 281 cu. in.
Horsepower @ rpm 305 @ 6000
Torque lb.-ft. @ rpm 320 @ 4250
Compression Ratio 10.1:1
Fuel System Sequential multi-port electronic fuel injection
Fuel Requirement Premium (91 octane minimum)
Exhaust System Stainless steel with chromed rolled tips
Transmission Type 5-speed manual
Final Drive Ratio 3.55:1
Gear Ratios (Manual) 1st - 3.38; 2nd - 2.00; 3rd - 1.32; 4th - 1.00; 5th - 0.62; Rev. - 3.38
Chassis Construction Unitized body
Front Suspension Independent, modified MacPherson strut with Separate spring on lower arm and stabilizer bar
Springs 600 lb Helical coil, rubber-insulated, unique linear rate
Shock Absorbers Integral with Tokico strut, gas-pressurized, Hydraulic, unique valving
Stabilizer Bar 26.5 mm (1.04 in.) solid
Rear Suspension Four-bar link with coil springs on lower arm, unique horizontal axle damper and stabilizer bar
Springs 250 lb Helical coil, rubber-insulated; unique linear rate
Shock Absorbers Unique axle damper, gas-pressurized, hydraulic. Vertical Tokico shock absorbers with horizontal axle dampers, unique valving
Stabilizer Bar 23 mm solid (.905 in.) solid
Steering Power-assisted rack-and-pinion
Overall Ratio 15.3:1 on center
Turning Diameter, Curb-to-Curb 38.1 ft.
Brakes Front Calipers Aluminum dual piston, custom anodised painted
Rotors 330 mm (13 in.) Brembo vented
Rear Calipers Single piston
Rotors 296 mm (11.7 in.) Brembo vented
ABS/Traction Control Yes
Pedals Stainless steel pedal covers are positioned to provide better heel-to-toe relationship
Wheels 17 x 8-inch Magnum 500-style "Heritage Style" (5 spoke)
Tires Goodyear 245/45ZR17 Eagle ZR45
Dimensions:
Wheelbase 257.3 cm (101.3 in.)
Overall Length 465.3 cm (183.2 in.)
Overall Height 132.9 cm (52.35 in.)
Overall Width 185.6 cm (73.1 in.)
Tread Width (Front/Rear) 152.9 cm (60.2 in.)/153.9 cm (60.6 in.)
Curb Weight 3465 lbs.
Front/Rear Seating Capacity 4
Aerodynamics Coefficient of Drag (Cd) 0.36
Luggage Capacity 10.9 cu. ft.
Passenger Volume 83.0 cu. ft.
Total Interior Volume 93.9 cu. ft.
Fuel Tank Capacity 15.7 gal.
I have also added a JLT CAI and Pro 5.0 shifter. The rest is stock. I have all the origional parts to pass California smog.
There is nothing wrong with it and it is one hell of a fun car. I just need the money for a new project.
Price: $ 23,500.00
You can contact me at jkwaters@sonic.net
http://www.sonic.net/jkwaters/2003Mach1/m1.jpg
http://www.sonic.net/jkwaters/2003Mach1/m2.jpg
http://www.sonic.net/jkwaters/2003Mach1/m3.jpg
http://www.sonic.net/jkwaters/2003Mach1/m4.jpg
http://www.sonic.net/jkwaters/2003Mach1/m5.jpg
http://www.sonic.net/jkwaters/2003Mach1/m6.jpg
http://www.sonic.net/jkwaters/2003Mach1/m7.jpg
http://www.sonic.net/jkwaters/2003Mach1/m8.jpg
http://www.sonic.net/jkwaters/2003Mach1/m9.jpg