View Full Version : Moser Axle Buy Final
blue65636563
06-04-2004, 08:41 PM
Ok I am trying to fig out which name is associated with who. I will have below the names on the list that I have counted that are for sure buying. screen names are diff than the emails so I got some of you confused. If you want to be added to the list email me at
mrrkaa@centurytel.net we need ONE more person. Ok here is who I have so far....And if you are not on the list please email me so I can add you also. Please include your forum screen name.
1. blue65636563-me 28 Spline
2. Texicali Mach- Ben 31 Spline
3. -Rex 28 Spline
4. -Joe 31 Spline
5. Luvmynad- 28 Spline
6. 04Mach1- Danny 31 Spline
7. Mr.L- Marty 31 Spline
8.My Monster-Wes 31 Spline
9. Robert B.-31 Spline
10.
getting closer!!!!!!!!!:HOPPY: :HOPPY: :HOPPY: $252.99 to your door 28 or 31 spline
blue65636563
06-05-2004, 02:48 PM
Comm'on we need ONE more person to complete this group purchase.
Adam
04 Mach one
06-05-2004, 05:19 PM
Come on guys.....we only need one more:HOPPY:
Maby we can do a group buy on some gears next!:eyebrows:
loathe
06-05-2004, 08:59 PM
lol, i just received a unactivated cc in the mail. Unsure if i should activate it as to whether i should use the card for emergency use. Ill think about it.:)
04 Mach one
06-05-2004, 09:38 PM
Originally posted by loathe
lol, i just received a unactivated cc in the mail. Unsure if i should activate it as to whether i should use the card for emergency use. Ill think about it.:)
I think this would be an emergency!!:THUMBSUP:
blue65636563
06-05-2004, 09:41 PM
Heck ya, an emergency it sure is. Your the one to make this possible. C'mon Loathe were counting on you!!!!!!!!!!:D :D :D :COOL:
04 Mach one
06-06-2004, 02:19 PM
Someone call 911 It's getting hot in here!!!!:THUMBSUP:
Anyone???
loathe
06-06-2004, 02:53 PM
ok i just activated the card today... let me make my final decision tonight--ill sleep on it. Till then.. ill let you know
\\Moses
04 Mach one
06-06-2004, 03:03 PM
Sleep well:ANGEL:
goebbelj@hotmai
06-06-2004, 03:05 PM
I would be number 4 (Joe 31 spline).
loathe
06-06-2004, 08:38 PM
how much you think labor would cost to install these axles in our mach?
04 Mach one
06-06-2004, 08:51 PM
I guess it all depends on the pricing in your area?? Up here I can get the whole rear end done for $300 bux ( axles, gears, etc).
goebbelj@hotmai
06-06-2004, 10:03 PM
Originally posted by 04 Mach one
Come on guys.....we only need one more:HOPPY:
Maby we can do a group buy on some gears next!:eyebrows:
I am waiting on the GP's for Ford Racing 4:10 gears, MM U/L control arms and a eaton differental. :D
loathe
06-07-2004, 10:08 AM
sorry guys,
I just talked to my friend, and he said he dosen't wanna mess with my axles. The labor cost to install the axles is too much for me.
TexiCaliMach04
06-07-2004, 11:25 AM
Originally posted by goebbelj@hotmai
I am waiting on the GP's for Ford Racing 4:10 gears, MM U/L control arms and a eaton differental. :D
I am also waiting on a GB for Ford Racing 4.10 gears, if anyone knows of one or is willing to set one up...let me know, I'll get in on it. I would set it up but my current location is limiting....
TexiCaliMach04
06-07-2004, 11:35 AM
forgot to mention...Blue, have you tried "advertising" the GB in one of the other forum topics...like the general mach discussion? it would be appropriate there....just a thought.
gilmoujr
06-07-2004, 02:48 PM
I may get in on the Group buy. I am undecided on the 31 or 28. Why should I get a 31 and what else would I have to do in order to put in 31. I just need to know so that I can better predict the increase in installation $'s and what else will be needed to make the 31 work. Also, should I replace the locker at the same time? Also, the gears. It may have made for a better deal if all three were done at the same time, right?
Junior2561
06-07-2004, 06:50 PM
how much does it cost to install these?
onebadmach1
06-07-2004, 07:37 PM
I'm in, that should make 10. Just sent you a email.
Thanks again
Bob
onebadmach1
06-07-2004, 07:39 PM
Hey junior! when we get them,I'll drive down and install them for ya for a small price,let me know
Bob
04 Mach one
06-07-2004, 08:08 PM
:HOPPY: This is great!!!! My wife is going to love me! NOW who needs gears:eyebrows: I think my wife would:smack: me but its all good:THUMBSUP:
gilmoujr
06-07-2004, 08:30 PM
onebadmach1,
Could I drive up and we do two at once? I want to do gears at the same time - maybe locker.
What should I go with, 31 or 28? What else would I need to buy it I did the 31?
Jim
blue65636563
06-07-2004, 08:41 PM
1. blue65636563-me 28 Spline
2. Texicali Mach- Ben 31 Spline
3. -Rex 28 Spline
4. goebbelj - Joe 31 Spline
5. Luvmynad- 28 Spline
6. 04Mach1- Danny 31 Spline
7. Mr.L- Marty 31 Spline
8.My Monster-Wes 31 Spline
9. Robert B.-31 Spline
10. onebadmach1-Bob 28 Spline
We now Have TEN people!!! I will email you all in just a bit and let you know whats going on.
gilmoujr if you and junior2561 want in on this GP then just email me and let me know as soon as possible, I don't wanna leave anyone outta this.
Thanks,
Adam
ITLRUN
06-07-2004, 11:35 PM
I'm interested in a set of 31 spline axles, can you give me a call at my shop tomm?
Do these axles include studs? I'm interested in standard length studs.
Joe Charles 888-367-3788 x120 thanks
blue65636563
06-08-2004, 12:09 AM
I'll give ya a call tomorrow round 12-1 o'clock pm that's my lunch at work but to answer your Q that price includes studs and the ABS hookup.
Thanks,
Adam
The Mach Says
06-08-2004, 01:25 PM
OMFG...............I haven't checked this forum in a while, but I want to get in on this ASAP..............
Plz PM me on how to get in on it, and let me know what you need from me (CC #, paypal, etc.)
thx,
JC
The Mach Says
06-08-2004, 01:25 PM
SORRY...............DBL POST! see above, thx, jc
gilmoujr
06-08-2004, 04:34 PM
Gear GP Thread (http://www.mach1registry.org/forums/showthread.php?s=&threadid=18482)
For anyone interested, I have a GP going for gears. Going for as low as $130 for gears, $155 with install kit (4.10's).
Why not kill two birds with one stone while it is taken apart?
Post Username and gear selected in other thread.
Jim
04 Mach one
06-09-2004, 05:11 PM
Money Sent:HOPPY:
Thanks Again
RedlineStick
06-11-2004, 11:34 AM
I it too late. I need a set of 31 spline fast. I blew mine up. Let me know thanks. -Stick-
serialheroes
06-11-2004, 04:14 PM
i would like to get in on the group buy for the moser 31 spline's
please email me with the details
thanx
ryan
hunters03@comcast.net
MY MONSTER
06-11-2004, 04:15 PM
Adam,
Not to sound too anal about things, but your source does know what dimensions we need for our Mach's right??? I'd hate to get in the middle of installing my gears, Tru Trac, and axles only to find out a piece of the puzzle doesn't fit...
Wes:SMASH:
blue65636563
06-12-2004, 01:29 AM
Yep all the specs are correct and they are for the Mach 1. There is still interest generating from others that are just now finding out about this group purchase. I have just today received three more emails from others wanting in on the group purchase. I don't want to leave anyone out so I need to put an END date. Others have already paid and have been waiting for awhile already. So the end of this GP is going to be one more week only. SAT. JUNE 18th will be the LAST day to get in on this. And the money must be paid no later than the following Tues-Weds.
Thanks,
Adam
blue65636563
06-12-2004, 03:07 AM
For the 5 people who have not paid and for others who are wanting in on this GP. Paypal is charging me $7.64 to accept the payment for the axles. If you must pay through paypal I ask that you add on an extra $7.88 on top of the 252.99 original price to cover the 3.02% charged to me for accepting your payment. I would just prefer the rest to pay via money order to prevent these extra charges and hassle. I am truely sorry for any inconvenience this may have caused you but this just came to my attention. Thank you for understanding.
any questions please feel free to call:
734-497-1140
Adam
NITROSTANG
06-14-2004, 12:39 AM
Adam
Please call me tomorrow at your convenience.
Thanks Jeff
serialheroes
06-14-2004, 07:57 PM
those of you upgrading to 31 spline axles ....what diff are you going to be going with. part numbers would also help
thanx
ryan
MY MONSTER
06-14-2004, 08:50 PM
I'm going with a Detroit Tech Tru Trac. Mr. Cosby hasn't seem to beat one up yet so it ought to live a nice long life in my Mach:LAUGH: ... He is testing a new 3 pinion design, if I remember correctly. There is a gentleman on the corral running the current design with 4.56's and on D/Rs and hasn't had any problems with it. It's about a $100 cheaper than the Eaton to boot.
NITROSTANG
06-15-2004, 12:58 AM
After numerous conversations with ADAM we have agreed that NITROSTANG RACING will be the company supplying the MOSER AXLES needed in your Group Purchase.
Final price has been discussed with ADM and forwarded to customers by him.
We also have the availability to discount Motorsport Gears and accessories.
3:55, 3:73 and 4:10 137.50
4:30 174.50
Install Kits from 35.00-105.00
Posi addative 3.00 with gear Purchase
Speed Cals available also.
Deeper discounts available on Multiple Product Purchases.
Thanks
Nitrostang Racing
04 Mach one
06-17-2004, 10:15 PM
Hey guys....this group buy is still going on...I think it will end this weekend?? The more people we get the less we pay:D
sutyak
06-18-2004, 09:19 AM
Man, the longer you hold this thread over my head the closer I get to buying! :D
Seriously though, when will be the absolute last day I can get in?
NITROSTANG
06-18-2004, 10:39 AM
All of the orders are going to be processed on my end on 6-28.
All payments must be received no later than Sunday night the 27TH
KCSailor
06-23-2004, 04:58 PM
Well after a small accident it looks like I will be buying a new axle and diff,
So count me in. Can anyone recommend a 31 diff (part # please) also could anyone with more experience than me (everyone) tell me what else I will need besides the axle and diff ?
NITROSTANG
06-23-2004, 08:01 PM
Contact me directly and I can help you with your differential needs also.
jspalmer01
06-24-2004, 02:10 AM
Originally posted by blue65636563
For the 5 people who have not paid and for others who are wanting in on this GP. Paypal is charging me $7.64 to accept the payment for the axles. If you must pay through paypal I ask that you add on an extra $7.88 on top of the 252.99 original price to cover the 3.02% charged to me for accepting your payment. I would just prefer the rest to pay via money order to prevent these extra charges and hassle. I am truely sorry for any inconvenience this may have caused you but this just came to my attention. Thank you for understanding.
any questions please feel free to call:
734-497-1140
Adam
Adam,
I sent you an email.
jspalmer01
06-26-2004, 01:40 AM
Adam,
Check Paypal for payment and address info.
blue65636563
06-26-2004, 08:57 PM
All money has been collected and is being processed. Each of you will be receiving an invoice from Jeff sometime early this week.
Any questions feel free to contact me
Thanks,
Adam
04 Mach one
06-28-2004, 08:47 PM
Thanks Adam for setting this up:THUMBSUP:
serialheroes
06-30-2004, 10:10 AM
has anyone received an invoice from Jeff yet?
jspalmer01
06-30-2004, 03:39 PM
Originally posted by serialheroes
has anyone received an invoice from Jeff yet?
Not here.
MY MONSTER
06-30-2004, 04:02 PM
Not yet...anybody have a phone number for Jeff?
The Mach Says
06-30-2004, 05:11 PM
Originally posted by serialheroes
has anyone received an invoice from Jeff yet?
I have...............I got my invoice. If I'm not mistaken, he's taking orders until Friday, so your order will not go out until then..........you should receive your invoices shortly I'd assume.
thx,
JC
blue65636563
06-30-2004, 07:18 PM
I have yet to receive one also but I do have a number if you would like to contact him.
Jeff:
954-614-8089
754-368-7336
Adam
NITROSTANG
06-30-2004, 08:48 PM
Everyone will recieve there Invoice once the product is shipped. It will be E-Mailed directly to you.
Adam sent me a bulk payment that unfortunately I missed delivery of today. I will have it tomorrow and proceed from there.
RedlineStick
07-02-2004, 05:36 PM
Nothing here yet
NITROSTANG
07-02-2004, 06:37 PM
I have received the payment. Invoices will be E-Mailed once the product is shipped.
serialheroes
07-07-2004, 05:44 PM
has anyone gotten an invoice yet?
NITROSTANG
07-07-2004, 05:47 PM
All of the orders have been processed. I have to call Moser and find out specifics on ship dates for all. I will be forwarding invoices by the weekend.
04 Mach one
07-10-2004, 05:02 PM
Originally posted by serialheroes
has anyone gotten an invoice yet?
???????
NITROSTANG
07-10-2004, 05:06 PM
Evertyhing was shipped out of Moser directly Yesterday. i will forward all of the invoices now. I figured I would wait to include a tracking number.
04 Mach one
07-10-2004, 05:08 PM
:HOPPY: Thank you!!!:HOPPY:
NITROSTANG
07-10-2004, 05:45 PM
Below is a list of names that I sent invoices to. These are the ones I have E-Mail addresses for.
Joseph CaCi
Benjamin Dullnig
Marty Lochman
Wesley Deters
Daniell Hill
Rex Schuler
Joe Goebbel
Robert Bilicki
Tom Vocolla
Adam Servey
Anyone else that needs an invoice please send me a direct invoice and I will send it to you.
Thanks again for all of your orders!!!!!!
RedlineStick
07-10-2004, 06:38 PM
Got my Invoice. Thanks you.
jspalmer01
07-10-2004, 06:59 PM
Originally posted by NITROSTANG
Below is a list of names that I sent invoices to. These are the ones I have E-Mail addresses for.
Joseph CaCi
Benjamin Dullnig
Marty Lochman
Wesley Deters
Daniell Hill
Rex Schuler
Joe Goebbel
Robert Bilicki
Tom Vocolla
Adam Servey
Anyone else that needs an invoice please send me a direct invoice and I will send it to you.
Thanks again for all of your orders!!!!!!
I sent the $ to Adam and don't see my name on this list, and no invoice. Hope I did not get forgotten. I ordered 28 splines with the ABS rings and regular studs.
My email is jspalmer01@earthlink.net
serialheroes
07-10-2004, 07:18 PM
need my invoice
i sent my money to adam
$252
hunters03@comcast.net
rob6773
07-11-2004, 05:48 PM
Got my invoice, but I did not see wheel studs listed on it.
NITROSTANG
07-11-2004, 05:50 PM
If you read the first line description it will tell you 28 or 31 spline and 4 or 5 lug. Then I liste the ABS after that.
jspalmer01
07-11-2004, 06:01 PM
Originally posted by NITROSTANG
If you read the first line description it will tell you 28 or 31 spline and 4 or 5 lug. Then I liste the ABS after that.
Did my order get processed??
28 spline, 5 lug, ABS ring, regular studs, Mach 1 length
jspalmer01@earthlink.net
Thanks,
John Palmer
NITROSTANG
07-11-2004, 06:17 PM
Invoice sent.
blue65636563
07-12-2004, 04:18 PM
Hey I got rained out at work today so I'm sitting home and guess who pulls up?? The delivery man, I got my axles today. Woo Wooo :COOL:
:CHEERS:
blue65636563
07-12-2004, 04:20 PM
Thanks Nitrostang
04 Mach one
07-12-2004, 07:58 PM
Originally posted by blue65636563
Thanks Nitrostang
Mine should be here tomorrow:D They tryed today but they had the wrong address:rolleyes: Oh well....come on Tuesday!
Thanks again for the GP!
jspalmer01
07-13-2004, 09:18 PM
Originally posted by NITROSTANG
Invoice sent.
I received the axles today but NO ABS sensor rings were attached. The GB included them. I want them on the axles. Please advise.
NITROSTANG
07-13-2004, 09:24 PM
I can understand your being upset. I will contact MOSER and find out what the Hell happened. I wioll contact them tomorrow.
serialheroes
07-13-2004, 09:28 PM
i also did not receive the abs ring
also is there suppose to be moser center caps in the end of the axles? everytime i see a picture of them in summitt they have them
jspalmer01
07-13-2004, 09:29 PM
Originally posted by NITROSTANG
I can understand your being upset. I will contact MOSER and find out what the Hell happened. I wioll contact them tomorrow.
Thanks. If possible, have them ship new axles with the ABS rings and have them include shipper so I can take these axles back to UPS. I don't think I should have to pay Moser for the ordering mistake on their part, and the shipping to send back.
jspalmer01
07-13-2004, 09:31 PM
Originally posted by serialheroes
i also did not receive the abs ring
also is there suppose to be moser center caps in the end of the axles? everytime i see a picture of them in summitt they have them
If there is supossed to be a center cap I did not get one either.....thanks.
RedlineStick
07-13-2004, 09:33 PM
Is anyone else have this problem., I should have mine tomarrow. But can you still put them in without the ABS rings.????
NITROSTANG
07-13-2004, 09:41 PM
You guys are all looking to make a big issue out of a simple mistake on Mosers end. I ordered 3 sets for stock and had no issues.
I will address this tomorrow and get back with you guys.
Send me direct E-Mail in reference to your problem.
RedlineStick
07-14-2004, 06:11 PM
I just got mine. What are these ABS rings. There was nothing else in the box. Are they attched and what do they look like. -Stick-
rob6773
07-14-2004, 06:24 PM
Mine came today and they are missing the rings.:(
NITROSTANG
07-14-2004, 11:20 PM
THE AXLES THAT YOU ALL RECEIVED ARE CORRECT. tHE AXLES ARE MACHINED SO THAT YOU USE THE ABS EXCITER RINGS THAT ARE ON YOUR STOCK AXLES. MOSER DOES NOT SELL EXCITER RINGS. I DO NOT THINK ADAM WAS UNDER THE IMPRESSION THAT THEY CAME WITH NEW RINGS.
THE RINGS JUST NEED TO BE PRESSED OFF OF THE OLD AXLES. YOU CAN CALL MOSER AT 1-260-726-6689 TO VERIFY IF YOU WISH.
THE EMBLEMS DO NOT COME WITH C-CLIP STYLE AXLES. THEY WILL ONLY BE THER ON NHRA LECAL AXLES WITHOUT THE C-CLIP BUTTON.
White2003Mach1
07-15-2004, 01:08 AM
quoted from the original GP thread...........
Ok guys,
I have the details, You can either have 28 or 31 spline for the same price. This price includes Studs and the ABS hookup and shipped to your house. I need 10 people minimum and if we can manage to get 50 to order than he will knock off more he didn't state how much but he said it would be a substantial amout. The price is going to be $252.99 to your house. If you want just the axles with no studs and no ABS it will be $225 shipped. BUT!!! the abs and studs have to be unanimous choice for everyone no exceptions. either we all get them with studs and abs or get them without. The last part is what is not so hot. All of the money has to be paid as a lump sum not in 20 different payments from everyone. The only thing I can offer is for you guys/gals to trust me is from ebay. I have an account on there and am registered with paypal. and you can check my past history 99.9% positive with only 1 neg feedback. If anyone else has an idea as to how you want the money situation handled then please lets hear it. I know myself I would be leary about giving someone i didn't know 250 bucks for axles. I am willing to accept the responsibility of handling the money but its up to you.
the $260.87 that was paid covered axles ,studs and exciter rings installed
NITROSTANG
07-15-2004, 01:53 AM
Before we go jumping to our own conclusions why don't we wait until ADAM chimes in here. I took over this Group Purchase as a Dealer/Distributor. Adam had contacted John Bennett the Sales Manager at Moser and was quoted this price of 253.00 shipped from our initial conversation. I contacted Moser and they told me that they never would have shipped him the product at that price. Based on that Adam decided to allow me to do the Group Purchase because I could guarantee that price.
Moser axles has a 2500.00 Buy in. Unlike most companies that buy in has to be at Retail Prices before they give you a dealer discount. They would not offer a Dealer Discount to a commoner off the street. I had to prove I was a legitimate business and go through a Credit Check to become a Distributor. It is not as simple as everyone thinks.
MOSER RETAIL PRICES
C-Clip style axles 28 or 31 spline 225.00
Studs 5 lug 15.00
Abs Adapter---Machine process 15.00
Materials Surcharge 2.00
Freight ranges between 17.00 and 30.00
That gives you a total of approximately 274.00 shipped.
I am not looking to give anyone a hard time here. I got paid for a product and I had a product shipped. As per Moser there is no reason to replace the ABS Exciter rings. They can be removed from the stock axles and re used.
Here is a link to Gene Evans Ford to show the additional 15.00 per exciter ring. That would make the total approximately 304.00 for the Axles. That is what you would have to pay to buy them Retail.
http://www.trademotion.com/partlocator/index.cfm?action=getLocator&siteid=213667&chapter=DP2FW0&appSectionid=18&groupid=10002&subgroupid=61482&make=10&model=Mustang&year=2003&catalogid=1
Is it because you want new rings or just because Adam thought they were included.
jspalmer01
07-15-2004, 01:57 AM
Yes, I was about ready to quote the same words from the original thread on this GP. Adam needs to chime in here on this GP because I had the exact same impression as Rex did. Adam told me over the phone it included the exciter rings installed. I specifically asked that question. That was the determining factor for me making the decision to go this route. I even included in my PayPal transfer payment a notation on what the money being transferred included.
Nitrostang (Jeff)....we are not trying to argue with you, but only stating what we were told. And I don't doubt the information you provided is true.
My feelings are we should be shipped the correct exciter rings for our car. I will pay to have them pressed on. That is a reasonable compromise. Adam...you need to work with Nitrostang on this or it may become ugly. I really don't want that to happen.
NITROSTANG
07-15-2004, 02:07 AM
I just left a message for Adam to chime in or call me. I am not sure what you guys think is going to happen here. I know what has to be done when these are used. There is no reason to replace the exciter rings. If ADAM agreed to that then I don't know what he is going to do for you. That was not part of the agreement I had with him.
Like I saidearlier, call Moser at 1-260-726-6689 and ask for John Bennett. He is the Sales Manager and he can explain it to you if you prefer to hear it from the company directly.
Just so you know alos. The Quote that you have listed above from Adam I never saw that. I don't think I was involved in that thread. Maybe I was, but I could not find it on the Board. Maybe you can send me an actual link instead of just the quote.
I am not trying to be an *** here. I run a legitmate business. I have never had an issue with a Group Purchase like this before and I have done many. There is absolutely no reason for mr to include something in a price that does not need to be replaced.
jspalmer01
07-15-2004, 02:11 AM
Jeff,
Here is the original thread
http://www.mach1registry.org/forums/showthread.php?s=&threadid=17722&highlight=moser+axles
It's the sixth response from the bottom.
NITROSTANG
07-15-2004, 02:17 AM
John
Thanks for the Link
Here is a quote from Adam's statement:
Ok guys,
I have the details, You can either have 28 or 31 spline for the same price. This price includes Studs and the ABS hookup and shipped to your house
That states the ABS Hook up. That does not specifically say theat you are getting new Exciter rings. That is why I say if there are any questions contact Moser. They can explain that there is no reason to buy new ones. You can use the old ones.
NITROSTANG
07-15-2004, 03:29 AM
Has anyone spoken to or heard from ADAM? I have called numerous times and no return calls. I alos niticed that he has not posted since Monday.
sfreidman
07-15-2004, 07:38 AM
Originally posted by NITROSTANG
If you read the first line description it will tell you 28 or 31 spline and 4 or 5 lug. Then I liste the ABS after that.
if a customer orders a part i think the customer should get the part... i have sold alot of the axles and i have never heard them coming with abs rings but when i do sell them i MAKE SURE THE CUSTOMER KNOWS THAT before i take any money i DONT WANNA MISLEAD THEM IN ANYWAY THATS WHAT IT SOUNDS LIKE IS HAPPENING HERE EVERYONE HAS GOTTON MISLEAD i hope everything works out for you guys
NITROSTANG
07-15-2004, 09:51 AM
First of all I have not mislead anyone. I know that they did not come with ABS rings. If anyone has an issue it would be Adam who started the group purchase. he was also mis lead by Moser when he spoke to them. That is how I ended up with the group purchase. He would not have been able to produce the product unless he lost monies.
rob6773
07-15-2004, 01:02 PM
It was the new rings that made this deal worth it. I knew from the beggining that I wanted new rings because re-using can cause damage. At my dad's shop we now only install re-man axles in FWD cars w/abs that have new rings. I refuse to get axles from rebuilbers who re-use rings because a dent in a ring leads to a long and un-productive work day. I thought this deal was too expensine in the beggining, but the price of the studs and the rings made the deal worth it.
04 Mach one
07-15-2004, 03:42 PM
Originally posted by jspalmer01
Yes, I was about ready to quote the same words from the original thread on this GP. Adam needs to chime in here on this GP because I had the exact same impression as Rex did. Adam told me over the phone it included the exciter rings installed. I specifically asked that question. That was the determining factor for me making the decision to go this route. I even included in my PayPal transfer payment a notation on what the money being transferred included.
Nitrostang (Jeff)....we are not trying to argue with you, but only stating what we were told. And I don't doubt the information you provided is true.
My feelings are we should be shipped the correct exciter rings for our car. I will pay to have them pressed on. That is a reasonable compromise. Adam...you need to work with Nitrostang on this or it may become ugly. I really don't want that to happen.
:agree:
I though they came with the new rings also????
NITROSTANG
07-15-2004, 04:32 PM
Moser problem. Has anyone spoken with Adam. Like I stated, I have tried to contact him numerous times and no return calls, e-mail or response here.
Seems kind of odd that he made the agreement with you guys. I am here defending myself but he is no where to be found since the problem was brought forward.
04 Mach one
07-15-2004, 06:42 PM
Originally posted by NITROSTANG
Seems kind of odd that he made the agreement with you guys. I am here defending myself but he is no where to be found since the problem was brought forward.
Don't take it the wrong way....we are not blaming you. We were all under the impression that we were getting new rings with the axles. Im sure this will all work out in the end.
Mach1 w/Shaker
07-15-2004, 07:24 PM
Originally posted by jspalmer01
My feelings are we should be shipped the correct exciter rings for our car. I will pay to have them pressed on. That is a reasonable compromise. Adam...you need to work with Nitrostang on this or it may become ugly. I really don't want that to happen.
Yep I thought they came with the rings as well and it looks like Adam (blue65636563) is selling his car here (http://www.mach1registry.org/forums/showthread.php?s=&postid=211718#post211718) so I really don't expect a resolution to this other than buying new rings from Ford or possibly re-using the old ones which I have been told is a PITA to remove and re-use without damaging them.
FWIW- We may be able to contact Skoozo and see if he can get us a good deal on the rings.
blue65636563
07-15-2004, 08:22 PM
HOLY COW!!!!!
Okay now I am not trying to be hiding out on anyone here but I have been on vacation and have not been able to be online. I was completely under the assumption that the price DID include new exciter rings. I didn't open my box for the axles to notice the abs ring missing but I got on here and see all this mess. I did go with jeff but the reason being was because we talked and he said that he can give me the same deal as originally stated maybe possibly getting a better discount if we had a total of 17 do the group buy. studs abs and 28-31 spline axles is what should have been the deal. I had two other vendors contact me and say that they could help me out but I had already committed to Jeff at this point. The reason for not answering my cell phone was becase I had lost it on my vacation. I have a temp cell # that is 734-497-6169. I have NO numbers to contact anyone as my phone that I prieviously had them is now gone. I have recieved NO emails as far as this problem that is going on right now the last email I have is from 406mustang which he sent me on the 14th. And as far as a resolution and a reply to another comment made by MACHW/SHAKER. I have put my car up as I am considering to sell it, just trying to see if anyone would be interested. I intend to get this situation settled and I am appauled at the fact that you would question my integrity as you do not even know me. This is the first that I have heard of the problem and I will talk with jeff about this futher. If anyone would like to contact me there is my temp # that you can get ahold of me at stated above. Thank you and I will be in touch soon.
Adam
NITROSTANG
07-15-2004, 08:32 PM
Adam
Sorry for getting you upset. I hope you enjoyed your vacation. We really need to talk. There was no discussion of new exciter rings. Why would I offer you something that is not needed to do the install. Like I posted above, contact Moser and verify that with John Bennett.
There is obviously a major miscomunication somewhere.
Ad a Distributor there is no reason for me to include something in a sale that is not needed. The ABS product from Moser is nothing more than a machine process so the axle will accept ABS rings.
NITROSTANG
07-15-2004, 08:34 PM
ABS Rings
If everyone wants I can get you exciter rings from my Motorsport Distributor if you really want. I don't feel that I should pay for them though since I never agreed to include them.
I can sell them to you for my cost which should be approximately 30.00 shipped to anyone in the Continental U.S.
NITROSTANG
07-15-2004, 09:19 PM
Phone call
Just spoke with Adam. we are going to both discuss this with Moser in the Am and see what was discussed,
Did anyone call them today? If so what was discussed?
Mach1 w/Shaker
07-15-2004, 09:48 PM
Originally posted by blue65636563
HOLY COW!!!!!
And as far as a resolution and a reply to another comment made by MACHW/SHAKER. I have put my car up as I am considering to sell it, just trying to see if anyone would be interested. I intend to get this situation settled and I am appauled at the fact that you would question my integrity as you do not even know me. This is the first that I have heard of the problem and I will talk with jeff about this futher. If anyone would like to contact me there is my temp # that you can get ahold of me at stated above. Thank you and I will be in touch soon.
Adam
Adam-
I apologize but I just stated what I thought was going to happen and I stand behind what I said. We will have to end up buying ABS rings unless you can convince Moser to take the axles back and install new ABS rings. I think that is highly doubtful but if you can pull it off great. Jeff has already spoken with Moser and they said they don't supply new ABS rings period. I wish you best of luck getting this resolved and sorry to have offended you. The sole reason I jumped on this GP was the new ABS rings. I have talked with three people who have already had this job done (all done by different installers) and they all said the same thing buy new exciter rings don't bother trying to re-use the old ones.
vBulletin® v3.8.4, Copyright ©2000-2024, Jelsoft Enterprises Ltd.