Roy
12-09-2012, 10:07 AM
03 turbo mach 1
Motor:
Teksid block
JE flat tops +.02 with tool steel pins
Total Seal AP rings
Oliver billet rods
Stock crank
Clevite Tri Armor bearings
Moroso billet rail alum oil pan w/canton screen
Billet oil pump gears
Fox Lake CNC ported heads, bronze guides, alum spark plugs thread inserts, Ferrai valves, hardened seats, crower springs w/titanium retainers
Custom turbo cams
6” runner intake
AccuFab TB
Trans:
JW TH400 manual w/brake
SFI Ultra Bell
Deep pan
TCI Pro X turbo converter
JW wheel flex plate
Hurst shifter
Rear end:
8.8
Strange 33 spline race axles
Strange light weight spool
Welded tubes w/braces
Alum cover
4.10 gear
Strange C-clim elims
Rear suspension:
Vari-Shocks DA coil overs w/billet adjustable lower mount
Anti-Roll bar
Team Z pro series uppers
CM DA lowers
Front Suspension:
Team Z cradle with A-arms
Strange struts with Hyper Coil coil over kit.
Steeda CC plates
Chassis:
10 pt. CM cage 8.50 cert.
Thru floor 3x2 frame connectors
Wolfe Racecraft parachute mount with Stroud chute.
Kirkey seats w/cloth covers
Wheels/Tires:
15x10 and 15x3.5 draglites with 325 50 15 MT drag radials
Brand new AlumaStars with 28x10.5S slicks and Hoosier fronts
Turbo system:
Headers are forward 1.75” 304 SS with ½” 304 flanges and 2.5” RPS clamps
2.5” 304 crossover with SPD inconel slip joint
Garret GT4788 turbo
5" downpipe splits into (2) 4" pipes. all 11ga. 6061 alum.
Tial BOV
Tial waste gate
2000 HP A/W intercooler front mount
Chiseled Performance water tank with Rule pump
Fuel system
Glens sumped tank
Weldon 2035A pump
-10 supply -8 return
Aeromotive regulator
CPR rails
Electronics:
EDIS ignition
FAST
MSD coils packs
Interior:
Florida 5.0 cluster with Auto Meter gages
Kirkey seats with cloth covers
Grant steering wheel with Racecraft removable hub
The engine, turbo system, and rear suspension are brand all new.
Car is AB 03 Mach 1 with 14K miles. I’m sure there is a ton I forgot.
Car made 1024 rwhp with a very soft tune.
$44K firm.
810-300-4204
Motor:
Teksid block
JE flat tops +.02 with tool steel pins
Total Seal AP rings
Oliver billet rods
Stock crank
Clevite Tri Armor bearings
Moroso billet rail alum oil pan w/canton screen
Billet oil pump gears
Fox Lake CNC ported heads, bronze guides, alum spark plugs thread inserts, Ferrai valves, hardened seats, crower springs w/titanium retainers
Custom turbo cams
6” runner intake
AccuFab TB
Trans:
JW TH400 manual w/brake
SFI Ultra Bell
Deep pan
TCI Pro X turbo converter
JW wheel flex plate
Hurst shifter
Rear end:
8.8
Strange 33 spline race axles
Strange light weight spool
Welded tubes w/braces
Alum cover
4.10 gear
Strange C-clim elims
Rear suspension:
Vari-Shocks DA coil overs w/billet adjustable lower mount
Anti-Roll bar
Team Z pro series uppers
CM DA lowers
Front Suspension:
Team Z cradle with A-arms
Strange struts with Hyper Coil coil over kit.
Steeda CC plates
Chassis:
10 pt. CM cage 8.50 cert.
Thru floor 3x2 frame connectors
Wolfe Racecraft parachute mount with Stroud chute.
Kirkey seats w/cloth covers
Wheels/Tires:
15x10 and 15x3.5 draglites with 325 50 15 MT drag radials
Brand new AlumaStars with 28x10.5S slicks and Hoosier fronts
Turbo system:
Headers are forward 1.75” 304 SS with ½” 304 flanges and 2.5” RPS clamps
2.5” 304 crossover with SPD inconel slip joint
Garret GT4788 turbo
5" downpipe splits into (2) 4" pipes. all 11ga. 6061 alum.
Tial BOV
Tial waste gate
2000 HP A/W intercooler front mount
Chiseled Performance water tank with Rule pump
Fuel system
Glens sumped tank
Weldon 2035A pump
-10 supply -8 return
Aeromotive regulator
CPR rails
Electronics:
EDIS ignition
FAST
MSD coils packs
Interior:
Florida 5.0 cluster with Auto Meter gages
Kirkey seats with cloth covers
Grant steering wheel with Racecraft removable hub
The engine, turbo system, and rear suspension are brand all new.
Car is AB 03 Mach 1 with 14K miles. I’m sure there is a ton I forgot.
Car made 1024 rwhp with a very soft tune.
$44K firm.
810-300-4204