lcaptmorg
11-13-2012, 05:17 PM
Thinking about selling the car. Dont have to but looking for a new project.
Car is set up for street/strip currenty but I can easily move it back to more street friendly.
03 AB Mach 22985mi, body is super clean. No dents or dings. Some road chips on the front end.
Motor:
Stock block
Na svt custom cams degreed gfs crank and cloys secondaries. Arp bolts
Na svt custom ported short runner
39lb injectors
Focus pump.
Sfi damper
Mezeir elect wp
Acufab tb
90mm maf
Powder coated cam covers and front cover.
Canton expansion and ps reservoir
1/4 intake spacer
Mrt cold air
1 5/8 Mac lt headers of road h, magna flow cat back
Suspension :
Front
Upr k
12/175 coil over
Mm cc plate
Takico d specs all around
Steady bump stear kit
Stock front break with ss lines cross drilled and slotted rotors por 15 coated spindles and calipers
Rear:
Mm weight jacker lowers
Baseline antirol
Baseline relocated upper
Stock springs
Torque box plates
Rearend
8.8
Welded tubes
Che axle brace
4:56s
31 spline mosers
True track
Low girdle
Arp cap studs
3" arp studs
Gt brakes, crossed drilled and slotted rotors, ss lines. Por 15 calipers.
Tranny:
Stock 3650 shifts well
Mgw shifter with sidewinder shift ball
Alum flywheel
Competition clutch custom df
Alum driveshaft with loop
Extras
Mad 2 step
Auto meter cobalt water temp gauge
Auto meter ddps level 2 shift light
Manual fan switch
Battery relocation with all wires ran internally. Relayed, cucuit breakers and fuses.
Shut off switch through tail light. ( have stock tail light in box)
Tinted windows.
Slp line lock.
Seat are a 9.8 out of 10 and have ver very little wear. IUP
Currently afs black insert 9x17s up front with 275/35/17 vredestiens . 5 k on the tires
Rear afs black insert 10x17s with mt drs 295x60x17.
Can include drag trim billet specialties with good from runner 27x11.5 x15 qt pros . 20 passes . All spacers and shanks for $1500
That all I can think of for now. Not sure what to ask for it but I'm certainly open to offers.
Email Lcaptmorg@aol.com for pics or offers
Car is set up for street/strip currenty but I can easily move it back to more street friendly.
03 AB Mach 22985mi, body is super clean. No dents or dings. Some road chips on the front end.
Motor:
Stock block
Na svt custom cams degreed gfs crank and cloys secondaries. Arp bolts
Na svt custom ported short runner
39lb injectors
Focus pump.
Sfi damper
Mezeir elect wp
Acufab tb
90mm maf
Powder coated cam covers and front cover.
Canton expansion and ps reservoir
1/4 intake spacer
Mrt cold air
1 5/8 Mac lt headers of road h, magna flow cat back
Suspension :
Front
Upr k
12/175 coil over
Mm cc plate
Takico d specs all around
Steady bump stear kit
Stock front break with ss lines cross drilled and slotted rotors por 15 coated spindles and calipers
Rear:
Mm weight jacker lowers
Baseline antirol
Baseline relocated upper
Stock springs
Torque box plates
Rearend
8.8
Welded tubes
Che axle brace
4:56s
31 spline mosers
True track
Low girdle
Arp cap studs
3" arp studs
Gt brakes, crossed drilled and slotted rotors, ss lines. Por 15 calipers.
Tranny:
Stock 3650 shifts well
Mgw shifter with sidewinder shift ball
Alum flywheel
Competition clutch custom df
Alum driveshaft with loop
Extras
Mad 2 step
Auto meter cobalt water temp gauge
Auto meter ddps level 2 shift light
Manual fan switch
Battery relocation with all wires ran internally. Relayed, cucuit breakers and fuses.
Shut off switch through tail light. ( have stock tail light in box)
Tinted windows.
Slp line lock.
Seat are a 9.8 out of 10 and have ver very little wear. IUP
Currently afs black insert 9x17s up front with 275/35/17 vredestiens . 5 k on the tires
Rear afs black insert 10x17s with mt drs 295x60x17.
Can include drag trim billet specialties with good from runner 27x11.5 x15 qt pros . 20 passes . All spacers and shanks for $1500
That all I can think of for now. Not sure what to ask for it but I'm certainly open to offers.
Email Lcaptmorg@aol.com for pics or offers