01trubluecobra
12-16-2010, 05:50 PM
http://sandiego.craigslist.org/csd/cto/2108425000.html
My good friend is selling his 03 Mach1 one so he can buy a SVT Raptor. This is my old Mach 1 and I can vouch he took care of it as good as I did. $15,000
In his words Mods:
2003 Ford Mustang Mach 1
I have taken every effort to do this car right and maintain and take, near obsessive compulsive, care of it. The car has some very minor cosmetic defects, which I consider to be very few and far between for a 2003. Always garaged and never seen rain since I have owned it. Being a Southern California car it hasn't even been washed with water in the past seven or eight months. A quick dusting every other day, clay baring before waxes and stuck back in the garage. I used this car mainly on weekends for cruises and as Friday go to work car. Below is a listing and description of the work put into this Mach 1. This car has been my baby and hope that it finds a new loving owner. Engine has roughly 2,000 miles since all engine work. This is a true pony car.
MMR Built 5.0 cammer aluminum block stroked to 5.3L using 9.5 to 1 compression with manley h beam rods, manley forged pistons, and forged cobra 8 bolt crank, with ARP 2000 rod bolts, main bolts, and head studs. Fedural mogul bearings, 5 angle valve job on heads with titanium valves and new springs, and stock cams degreed. Ported and polished lower intake manifold and intake spacer.even flow gen2 head cooling mod. Tuned by Dante at dantes modular performance useing x-cal 3. Current tune is producing 365rwhp/400rwtq.
JLT cold air intake
JBA shorty headers
Magnaflow X-pipe w/ cats (also have original H-pipe)
Magnaflow catback exhaust
TRG plugs
39lb. injectors
03-04 Cobra Fuel Pumps and Tank
Bilstien HD Struts
Misimoto Radiator
Full Maximum Motorsports Hellion turbo K-member kit with urethane bushings standard geometry with A-arms and coil overs
Maximum Motorsports caster camber plates
Maximum Motorsports rear coil overs with HD struts
Maximum Motorsports heavy duty torque arm
Maximum Motorsports panhard bar
Maximum Motorsports lower control arms
Maximum Motorsports full length subframe connectors
FRPP Aluminum drive shaft.
MGW shifter
Powerslot drilled and slotted rotors
Optima red top battery
Front wheels17x9 Anthracite FR500 w/ Nitto NT555ZR extreme performance (275/40/17)
Rear wheels18x10 Anthracite FR500 wheels w/ Nitto NT555 R (305/40/18)
Starguard Alarm with removable chip
Xcal 3 programmer
My good friend is selling his 03 Mach1 one so he can buy a SVT Raptor. This is my old Mach 1 and I can vouch he took care of it as good as I did. $15,000
In his words Mods:
2003 Ford Mustang Mach 1
I have taken every effort to do this car right and maintain and take, near obsessive compulsive, care of it. The car has some very minor cosmetic defects, which I consider to be very few and far between for a 2003. Always garaged and never seen rain since I have owned it. Being a Southern California car it hasn't even been washed with water in the past seven or eight months. A quick dusting every other day, clay baring before waxes and stuck back in the garage. I used this car mainly on weekends for cruises and as Friday go to work car. Below is a listing and description of the work put into this Mach 1. This car has been my baby and hope that it finds a new loving owner. Engine has roughly 2,000 miles since all engine work. This is a true pony car.
MMR Built 5.0 cammer aluminum block stroked to 5.3L using 9.5 to 1 compression with manley h beam rods, manley forged pistons, and forged cobra 8 bolt crank, with ARP 2000 rod bolts, main bolts, and head studs. Fedural mogul bearings, 5 angle valve job on heads with titanium valves and new springs, and stock cams degreed. Ported and polished lower intake manifold and intake spacer.even flow gen2 head cooling mod. Tuned by Dante at dantes modular performance useing x-cal 3. Current tune is producing 365rwhp/400rwtq.
JLT cold air intake
JBA shorty headers
Magnaflow X-pipe w/ cats (also have original H-pipe)
Magnaflow catback exhaust
TRG plugs
39lb. injectors
03-04 Cobra Fuel Pumps and Tank
Bilstien HD Struts
Misimoto Radiator
Full Maximum Motorsports Hellion turbo K-member kit with urethane bushings standard geometry with A-arms and coil overs
Maximum Motorsports caster camber plates
Maximum Motorsports rear coil overs with HD struts
Maximum Motorsports heavy duty torque arm
Maximum Motorsports panhard bar
Maximum Motorsports lower control arms
Maximum Motorsports full length subframe connectors
FRPP Aluminum drive shaft.
MGW shifter
Powerslot drilled and slotted rotors
Optima red top battery
Front wheels17x9 Anthracite FR500 w/ Nitto NT555ZR extreme performance (275/40/17)
Rear wheels18x10 Anthracite FR500 wheels w/ Nitto NT555 R (305/40/18)
Starguard Alarm with removable chip
Xcal 3 programmer