17"x10.5" Machined finish wheels....

[jr81menards]

I am in search for 17"X10.5" machined finish wheels for my wife's 04 MACH 1 showcar. I need two for the rear and any help would be greatly appreciated. Thanks Don Mosley ....jr81menards@yahoo.com

[04machwon22]

if your looking for 17x10.5 mach 1 wheels........ Good luck

[Unrealford]

If your willing to buy mine for 3000, Id part with em..:butt:

[04machwon22]

you would say that... id say dont waste your money on 17x10.5 mach 1 wheels just get some 18s they look alot better

[Unrealford]

you would say that... id say dont waste your money on 17x10.5 mach 1 wheels just get some 18s they look alot better

,What do you mean"I would say that" Do you know me?:)....18 also ride harsher..

[gamatt]

Might want to check with this guy: http://www.mach1registry.org/forums/showthread.php?t=100185&highlight=late+model

If you go all the way through he says he can get 17x9's in original finish, so you could at least put 275 rear tires on to get somewhat of a deep dish look.

[04machwon22]

,What do you mean"I would say that" Do you know me?:)....18 also ride harsher..

you have more than once offered your 10.5 machs for the low low price of 3k dollars :23:

[White04Mach]

you have more than once offered your 10.5 machs for the low low price of 3k dollars :23:

They are up to $3000? Last I knew they were $2500? :23:

[nelos04]

I just had a lil chat with the mg at afs and he said that in a few months the machs are going to be back:worship:, I have a tour of the facility tommorow wait it's 3am so I guess today :smack: .

[nickster]

heeeelllllll yahaaaaa keep us posted i want the first set:smokin:

[Unrealford]

you have more than once offered your 10.5 machs for the low low price of 3k dollars :23:

Ohh Ya thats true, Last time I thought I said 2,500?:23:

[nelos04]

we'll guys things are looking pretty good at AFS right now they got the 17x9's with no lip but they have an order with another company to produce the 10.5's

[Unrealford]

we'll guys things are looking pretty good at AFS right now they got the 17x9's with no lip but they have an order with another company to produce the 10.5's

DAmm I wanted to be the only person with these..:anger: :23:

[jr81menards]

I appreciate all the info...I have found some for believe it or not for under $3000.00...LOL

I can offer you this though...I'll spot you 2 car length's in 1/4 and run you for the 10.5's, but hey I'll be nice and let you ride home on the 17x8s off mine.....THANKS TO YOU ALL FOR HELP WITH WHEELS...Have a Happy New Year!!!!

[GAZ]

we'll guys things are looking pretty good at AFS right now they got the 17x9's with no lip but they have an order with another company to produce the 10.5's

If you hear anything on the 10.5 please let me know. I have been calling AFS every so often for a year now. For sure want a pair when thy come out.

[NJ 03Mach1]

Could always just have Weldcraft make you what ever size you want... That's the route I'm going...


http://www.weldcraftwheels.com

[ScreamingMach46]

I would sell my Stock finish AFS 17x9 & 17x10.5 for a reasonable price. If anyones interested PM me.

[gamatt]

I would sell my Stock finish AFS 17x9 & 17x10.5 for a reasonable price. If anyones interested PM me.

What did the 10.5's go for originally from AFS? The definition of "reasonable price" for these wheels is finally going to come down if they do finally start offering them again.

[soyplata]

Bought mine 4 yrs. ago for $150 apiece, glad i did. No issuses with clearcoat peeling!:smokin:

[ScreamingMach46]

What did the 10.5's go for originally from AFS? The definition of "reasonable price" for these wheels is finally going to come down if they do finally start offering them again.

I have no idea what the went for new I got my sets used.

[BOSS 58]

I think I paid about 500 for set of 2... we ordered 2 sets we paid about 1000 + or - $100 dollars..

http://i242.photobucket.com/albums/ff75/joe_boss_58/P4200268.jpg

[ScreamingMach46]

**** those look good on SY.

[gamatt]

Bought mine 4 yrs. ago for $150 apiece, glad i did. No issuses with clearcoat peeling!:smokin:

Sweet, I hope that's about what they bring them back for. I'm all over a set. One of my stockers has rash and another has clearcoat failure due to over-exuberance with wheel cleaner. All courtesy of the previous owner. The other two are mint, so they are going up front.

[WOODY]

Nice. A pair of those w/ black insets and a set of the 9" from AM w/ the slightly bigger lips for the front would look AMAZING!

[Zombie_Reaper]

I think I paid about 500 for set of 2... we ordered 2 sets we paid about 1000 + or - $100 dollars..

http://i242.photobucket.com/albums/ff75/joe_boss_58/P4200268.jpg


Dagum those are sweet. AFS hopefully will produce them so I can buy me a set. Woot.

[jv7]

5yrs ago I bought 2 17x10.5 chrome mach1 wheels and had them machined to look like stockers. Back then cost me about 100.00 ea. to have them machined. See if you can find a place in your area that will do that. Good luck.

[gamatt]

Bump...NELOS04, any update?

[gamatt]

Bump to keep hope alive for afs 10.5's :23:

[terry3blue]

I called AFS wheels and they said 2months their going to make some more 17x10.5

[Fire Dude]

Woo Hoo! I'm in. Just need to find a way to get them to Canada.......

[White04Mach]

I called AFS wheels and they said 2months their going to make some more 17x10.5

They told me that 2 years ago. It's always 2 or 3 months anytime anyone calls. If they do make them again I hope they have better clear on them this time.

[1bad67mustang]

They told me that 2 years ago. It's always 2 or 3 months anytime anyone calls. If they do make them again I hope they have better clear on them this time.

+1, i call them once a month for the past year and they always say 2 months and they will have some in. :bs:

[gamatt]

Great, I'll guess I'll be ordering some spacers and call it a day. :anger: :eyes:

[SHAKEN 661]

This AFS drama is BS. I don't understand why a company who gets prolly dozens of phone calls a month about a specific wheel being made, why the hell they don't produce them again. Its kind of an oxy-moron!

[Red10thcv]

Question what are 17x10.5 and 17x9 Machine finish wheels Worth?
Rims with Goodyear tires? I'll be selling the car and returning it back to stock.
Thanks.

[nikbait]

They're worth what someone is willing to pay for them. Being's how AFS keeps 'saying' that they're gonna make them....right now there is such a high demand for them and not enough supply. I got a set of the black finish ones, and LOVE them. They match my AB mach perfectly. Not to say that i wouldn't pick up a set of stock finish ones if they were ever made again, cuz I would, but I love mine. But like I said, they're only worth what someone is willing to pay for them. I've seen them go for like $1K or less for a set.

[ASH302]

I think I paid about 500 for set of 2... we ordered 2 sets we paid about 1000 + or - $100 dollars..

http://i242.photobucket.com/albums/ff75/joe_boss_58/P4200268.jpg

that looks sick and i love this picture

[ASH302]

also both mach's being lowered that even is better, hate stock ride height

[xeno1234]

hey do you have any pics of your ride with those wheels nikbait?

[MADASS]

I called them today... and they are still telling 2 months before they have some in stock... I really don't get it! Either you will have them or not but don't lie and pretend you will